Q193907: Windows NT 4.0 SP4 Supports IGMP Version 2
Article: Q193907
Product(s): Microsoft Windows NT
Version(s): 4.0 SP4
Operating System(s):
Keyword(s): kbnetwork kbFEA kbWinNT400sp4fea
Last Modified: 03-APR-2002
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows NT Workstation version 4.0 SP4
- Microsoft Windows NT Server version 4.0 SP4
-------------------------------------------------------------------------------
SUMMARY
=======
Windows NT 3.51 and later supports Internet Group Management Protocol (IGMP)
version 1. The Service Pack 4 update for Windows NT 4.0 provides support for
IGMP version 2.
MORE INFORMATION
================
IGMP is used by IP hosts to report their host group memberships to any
immediately-neighboring multicast routers. IGMP messages are encapsulated in IP
datagrams, with an IP protocol number of 2. Internetwork forwarding of IP
multicast datagrams is handled by multicast routers. Windows NT currently does
not support multicast forwarding.
IP multicasting is the transmission of an IP datagram to a "host group," a set of
zero or more hosts identified by a single IP destination address. The membership
of a group is dynamic; that is, hosts may join and leave groups at any time.
A permanent group has a well-known, administratively assigned IP address. It is
the address, not the membership of the group, that is permanent. Host groups are
identified by class D IP addresses (from 224.0.0.0 to 239.255.255.255).
224.0.0.0 is guaranteed not to be assigned to any group, and 224.0.0.1 is
assigned to the permanent group of all IP hosts (including gateways). There is
no multicast address for all hosts on the total Internet. RFC 1700 has a list of
permanent Internet multicast addresses.
There are two types of IGMP message of concern to host-router interaction in IGMP
v1:
- Host Membership Query
- Host Membership Report
Multicast routers send Host Membership Query messages to discover which host
groups have members on their attached local networks. The multicast router needs
to know this information because, if there is a host group with no members in a
segment, it will not forward multicast packets for that group to the segment.
Queries are addressed to the all-hosts group (address 224.0.0.1).
Hosts respond to a Query by generating Host Membership Reports, reporting each
host group to which they belong on the network interface from which the Query
was received. Routers do not know -- and do not need to know -- which hosts
belong to a group, only that at least one host belongs to a group on a
particular network. When a host joins a new group, it should immediately
transmit a Report for that group.
There are three types of IGMP message of concern to the host-router interaction
in IGMP v2:
- Membership Query
- Version 2 Membership Report
- Leave Group
There is an additional type of message, for backwards-compatibility with IGMP
v1:
- Version 1 Membership Report
IGMP v2 allows a computer to inform the router that it is leaving a group. This
update enables the router to determine if there are no more members in a group
and then runs a command to stop forwarding multicast packets on to the link.
This update is useful when users are frequently joining and leaving groups.
When a host leaves a multicast group, if it was the last host to reply to a Query
with a Membership Report for that group, it should send a Leave Group message to
the all-routers multicast group (224.0.0.2).
An IGMP v2 host may be placed on a subnet where the querying router has not yet
been upgraded to IGMP v2. The IGMP v1 router will send General Queries with the
Max Response Time set to 0. This must be interpreted as a value of 100 (10
seconds). An IGMP v2 host may suppress Leave Group messages on a network where
the query is using IGMP v1.
An IGMP v2 router may be placed on a subnet where at least one router on the
subnet has not yet been upgraded to IGMP v2. The query must use IGMP v1. The use
of IGMP v1 must be administratively configured.
For additional information, check the "IGMPLevel" Windows NT registry parameter
in the following article in the Microsoft Knowledge Base:
Q120642 TCP/IP and NBT Configuration Parameters for Windows 2000 or Windows
NT
For additional information, also see the following RFCs:
- RFC 1054 - Host Extensions for IP Multicasting
- RFC 1112 - Internet Group Management Protocol, Version 2
Additional query words: IGMP 2.0 4.0
======================================================================
Keywords : kbnetwork kbFEA kbWinNT400sp4fea
Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400search kbWinNT400search kbWinNTW400sp4 kbWinNTSsearch kbWinNTS400sp4 kbWinNTS400search
Version : :4.0 SP4
Issue type : kbinfo
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1986-2002.