Q191850: Convert Reports Cannot Create Elementary File System Structures
Article: Q191850
Product(s): Microsoft Windows NT
Version(s): WinNT:4.0
Operating System(s):
Keyword(s): kbWinNT400sp4fix
Last Modified: 09-AUG-2001
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows NT Workstation version 4.0
- Microsoft Windows NT Server version 4.0
- Microsoft Windows NT Server version 4.0, Terminal Server Edition
-------------------------------------------------------------------------------
SYMPTOMS
========
Conversion from FAT to NTFS fails and the following error message appears:
Cannot create the elementary file system structures.
The conversion failed
C: was not converted to ntfs
This error occurs on Alpha systems when performing an unattended installation
using the following options in the Unattend.txt file:
[Unattended]
OemPreinstall = yes
FileSystem = ConvertNTFS
ExtendOemPartition = 1
CAUSE
=====
This problem only occurs if you apply the Alpha-based hotfix referenced in the
following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q185773
TITLE : NTFS Corruption on Drives > 4 GB Using ExtendOEMPartition
The ExtendOEMPartition option extends the partition to the maximum size of the
drive. The above hotfix enables this feature so that it works correctly on
drives exceeding 4 GB in size. There is a BIOS limitation on x86-based computers
that limit the maximum size of a partition to 7.8 GB. Because this limitation
does not exist on Alpha systems, the byte offset may exceed 32 bits. A problem
in Fastfat.sys fails any disk access that calculated a byte offset exceeding 32
bits.
RESOLUTION
==========
To resolve this problem, obtain the latest service pack for Windows NT 4.0 or
Windows NT Server 4.0, Terminal Server Edition. For additional information,
please see the following article in the Microsoft Knowledge Base:
Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack
NOTE: This fix applies to both x86 and Alpha platforms and supercedes the hotfix
referenced in the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q185773
TITLE : NTFS Corruption on Drives > 4 GB Using ExtendOEMPartition
NOTE: In addition to the above file, the following additional files must be
obtained from the latest Windows NT 4.0 Service Pack. The service pack should be
of the same language as that being installed:
x86 Alpha
--------------------------
Gdi32.dll Gdi32.dll
Hal.dll Halgammp.dll
Hal486c.dll Halpinna.dll
Halapic.dll Halrawmp.dll
Halast.dll Halsabmp.dll
Halcbus.dll Kernel32.dll
Halcbusm.dll Ntdll.dll
Halmca.dll Ntkrnlmp.exe
Halmps.dll Ntoskrnl.exe
Halmpsm.dll User32.dll
Haloli.dll Win32k.sys
Halsp.dll Winsrv.dll
Halwyse7.dll
Kernel32.dll
Ntdll.dll
Ntkrnlmp.exe
Ntoskrnl.exe
User32.dll
Win32k.sys
Winsrv.dll
Perform the following steps to successfully install this hotfix:
1. Start the computer in MS-DOS mode and prepare the drive for Windows NT
unattended installation as usual. This includes copying the .\I386 or .\Alpha
folder from the Windows NT CD to the install directory on drive C.
2. Copy the fixed files into a temporary folder.
3. Apply the fixed files and required service pack dependency files to the
install directory on drive C. The service pack CD should be that of the same
language as that being installed. Because the service pack CDs are in Windows
NT Unicode format, they cannot be read directly from MS-DOS. The service pack
files may need to be transferred from a Windows NT system capable of reading
the service pack CD or the service pack files can be read directly using
MS-DOS from the Enterprise Server CD in the "\SP3\i386" or "\SP3\Alpha"
directory. The service pack dependency files are listed above. This step can
be performed automatically using the Oemsetup.bat batch file if you have the
dependency files in an MS-DOS readable format. Otherwise, you must perform
this step manually:
Manual Instructions for the Intel Platform
------------------------------------------
Batch File Option:
From the temporary folder, run Oemsetup.bat, specifying both the source
service pack folder and the target install folder. For example (assume D: is
a service pack folder and C:\I386 is the install folder):
OEMSETUP D:\SP3\I386 C:\I386
This copies the necessary files to the I386 and C:\I386\System32 folders on
drive C where the installation folder is located.
Manual Option:
You can also perform this step manually by first copying Fastfat.sys from the
fix to the C:\I386 install folder, and then copy the following files from the
latest Windows NT 4.0 service pack to the C:\I386 and C:\I386\System32
folders as denoted below:
Fastfat.sys -> ..\I386
Hal.dll -> ..\I386
Hal486c.dll -> ..\I386
Halapic.dll -> ..\I386
Halast.dll -> ..\I386
Halcbus.dll -> ..\I386
Halcbusm.dll -> ..\I386
Halmca.dll -> ..\I386
Halmps.dll -> ..\I386
Halmpsm.dll -> ..\I386
Haloli.dll -> ..\I386
Halsp.dll -> ..\I386
Halwyse7.dll -> ..\I386
Ntdll.dll -> ..\I386 and -> ..\I386\SYSTEM32
Ntoskrnl.exe -> ..\I386
Ntkrnlmp.exe -> ..\I386
Win32k.sys -> ..\I386
User32.dll -> ..\I386
Kernel32.dll -> ..\I386
Gdi32.dll -> ..\I386
Winsrv.dll -> ..\I386
Then remove the compressed versions of these files from the C:\I386 and
C:\I386\System32 folders. Compressed files are identified by the last
character of the file type containing an underscore (_). For example, delete
Fastfat.Sy_, Hal.dl_, Ntdll.dl_, Ntoskrnl.ex_, and so on.
Manual Instructions for the Alpha Platform
------------------------------------------
Batch File Option:
From the temporary folder, run Oemsetup.bat specifying both the source service
pack folder and the target install folder. For example (assume D: is a
service pack folder and C:\Alpha is the install folder):
OEMSETUP D:\SP3\Alpha C:\Alpha
This copies the necessary files to the Alpha and C:\Alpha\System32 folders on
drive C where the installation folder is located.
Manual Option:
You can also perform this step manually by first copying Fastfat.sys from the
fix to the C:\Alpha install folder then copy the following files from the
latest Windows NT 4.0 service pack to the C:\Alpha and C:\Alpha\System32
folders as denoted below:
Fastfat.sys -> ..\Alpha
Halgammp.dll -> ..\Alpha
Halpinna.dll -> ..\Alpha
Halrawmp.dll -> ..\Alpha
Halsabmp.dll -> ..\Alpha
Ntdll.dll -> ..\Alpha and -> ..\Alpha\SYSTEM32
Ntoskrnl.exe -> ..\Alpha
Ntkrnlmp.exe -> ..\Alpha
Win32k.sys -> ..\Alpha
User32.dll -> ..\Alpha
Kernel32.dll -> ..\Alpha
Gdi32.dll -> ..\Alpha
Winsrv.dll -> ..\Alpha
Then remove the compressed versions of these files from the C:\Alpha and
C:\Alpha\System32 folders. Compressed files are identified by the last
character of the file type containing an underscore (_). For example, delete
Fastfat.Sy_, Halgammp.dl_, Ntdll.dl_, Ntoskrnl.ex_, and so on.
4. Run Winnt.exe as usual to complete the Windows NT installation.
5. When the Windows NT installation is complete, apply the latest service pack
immediately. This eliminates inconsistent releases of system files.
STATUS
======
Microsoft has confirmed this to be a problem in Windows NT 4.0 and Windows NT
Server 4.0, Terminal Server Edition. This problem was first corrected in Windows
NT 4.0 Service Pack 4.0 and Windows NT Server 4.0, Terminal Server Edition
Service Pack 4.
Additional query words: corrupt user domain
======================================================================
Keywords : kbWinNT400sp4fix
Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbNTTermServ400 kbNTTermServSearch
Version : WinNT:4.0
Hardware : ALPHA x86
Issue type : kbbug
Solution Type : kbfix
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1986-2002.