KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q174251: FS98/2000: How to Enable 3D Hardware Acceleration

Article: Q174251
Product(s): Microsoft Home Games
Version(s): WINDOWS:
Operating System(s): 
Keyword(s): kbdisplay kbenv kbtlc fs98 kbimu msgamekbfaq
Last Modified: 07-MAY-2002

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Flight Simulator 2000 
- Microsoft Flight Simulator 2000 Professional Edition 
- Microsoft Flight Simulator 98 
-------------------------------------------------------------------------------

SUMMARY
=======

This article describes how to enable Direct3D hardware acceleration in Flight
Simulator 2000 or Flight Simulator 98.

Flight Simulator is not configured to run in Direct3D mode automatically, even if
a DirectX-enabled 3D video adapter or accelerator card is installed in the
computer with a compatible driver.

Microsoft does not supply the drivers for Direct3D-enabled video adapters.
However, DirectX Setup may install an updated version of your video driver when
you install Flight Simulator.

NOTE: Not all Direct3D-enabled video adapters support Direct3D hardware
acceleration in Flight Simulator 2000 or Flight Simulator 98. To run Flight
Simulator 2000 in Direct3D mode, your 3D video adapter must be fully compatible
with Direct3D 7.0 or later. To run Flight Simulator 98 in Direct3D mode, your 3D
video adapter must be fully compatible with Direct3D 5.0 or later.

You may need to change certain driver settings to configure your 3D video adapter
to support Direct3D hardware acceleration in Flight Simulator. For information
about how to do this, please contact the manufacturer of your video adapter.

MORE INFORMATION
================

To enable your 3D video adapter to run in Direct 3D mode, use the appropriate
method for your version of Flight Simulator.

Flight Simulator 2000
---------------------

1. Read the Readme.txt file located on the Flight Simulator 2000 CD-ROM to learn
  any last minute information about your video adapter.

2. Start Flight Simulator 2000.

3. Change the view to Full Screen mode. To do this, press ALT+ENTER, or on the
  View menu, click Full Screen.

4. On the Options menu, point to Settings, and then click Display.

5. On the Hardware tab, click to select the "Enable hardware acceleration" check
  box.

6. In the Device box, click the 3D video driver you want to use.

  NOTE: If no Direct3D driver is available, DirectX does not recognize your 3D
  video adapter. If this is the case, reinstall the video driver for your
  Direct3D-compatible video adapter, or reinstall DirectX 7.0 or later.

7. In the Resolution box, click the screen resolution you want to use, and then
  click the CHECK MARK button to return to the cockpit.

Flight Simulator 98
-------------------

1. Read the Readme.txt file located on the Flight Simulator 98 CD-ROM to learn
  any last minute information about your video adapter.

2. Start Flight Simulator 98.

3. Change the view to Full Screen mode. To do this, press ALT+ENTER, or on the
  View menu, click Full Screen.

4. On the Options menu, click Preferences.

5. Click the Display tab.

6. Click Display Options.

7. Click the Hardware Acceleration tab.

8. Click to select the "Enable hardware acceleration" check box.

9. In the "Fullscreen device" box, click Primary Display Driver (Direct3D) or
  the 3D video adapter or accelerator card you want to use.

  NOTE: If no Direct3D driver is available, DirectX does not recognize your 3D
  video adapter. If this is the case, reinstall the video driver for your
  Direct3D-compatible video adapter, or reinstall DirectX 5.0 or later.

10. In the "Fullscreen mode" box, click the screen resolution you want to use,
  and then click OK until you return to the cockpit.

In certain versions of DirectX, you can use the DirectX Setup tool (Dxsetup.exe)
to turn Direct3D hardware acceleration on or off. To do this:

1. Click Start, point to Find, and then click "Files or Folders."

2. In the Named box, type "dxsetup.exe" (without the quotation marks).

3. In the "Look in" box, click My Computer, and then click Find Now.

4. In the list of found files, double-click the Dxsetup.exe file to start the
  program.

5. Click to select the "Direct3D hardware acceleration enabled" check box, and
  then click OK.

Additional query words: flightsim fs98 fs2000 fs2k 3-d

======================================================================
Keywords          : kbdisplay kbenv kbtlc fs98 kbimu msgame kbfaq
Technology        : kbGamesSearch kbFlightSimSearch kbFlightSim2000 kbFlightSim98 kbSimSearch
Version           : WINDOWS:
Issue type        : kbhowto
Solution Type     : kbpending

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.