KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q172421: Verisign Certificate Password Not Accepted in Key Manager

Article: Q172421
Product(s): Internet Information Server
Version(s): WinNT:3.0
Operating System(s): 
Keyword(s): kb3rdparty kbsetup
Last Modified: 02-MAY-1999

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Internet Information Server 3.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you try to install a Verisign certificate, Key Manager may not accept the
password assigned for that certificate, and the certificate fails to install.

RESOLUTION
==========

Perform the following steps to work around this problem:

1. Open the certificate in a text editor (such as Notepad).

2. Insert blank lines before "Begin Certificate" and after "End Certificate" as
  below:

        <insert blank line here>
        -----BEGIN CERTIFICATE-----
        MIICiTCCAjOgAwIBAgICAmMwDQYJKoZIhvcNAQEEBQAwgYIxCzAJBgNVBAYTAlVTMRI
        wEAYDVQQKEwlNaWNyb3NvZnQxJjAkBgNVBAsTHVBlcnNvbmFsIGFuZCBCdXNpbmVzcy
        BTeXN0ZW1zMTcwNQYDVQQDEy5NaWNyb3NvZnQgRGVtbyBDQSAtLSBGb3IgVGVzdGluZ
        yBQdXJwb3NlcyBPbmx5MB4XDTk3MDYxMTEzMTYzOFoXDTk4MDYxMTEzMTYzOFowaTEL
        MAkGA1UEBhMCVVMxEjAQBgNVBAgTCUNoYXJsb3R0ZTELMAkGA1UEBxMCTkMxEjAQBgN
        VBAoTCU1pY3Jvc29mdDEOMAwGA1UECxMFSXRlYW0xFTATBgNVBAMUDHN0dW1wanVtcG
        VyMjBbMA0GCSqGSIb3DQEBAQUAA0oAMEcCQG+iFOxAWKwpYwXa/eQKL30g0XIwDk0K7
        op8LOoygU86Uih/NkU4dYzVTBUVtvtxEoVyKARBD3ofPBRFEUuaFskCAwEAAaOBqzCB
        qDCBpQYDVR0BBIGdMIGaoYGFMIGCMQswCQYDVQQGEwJVUzESMBAGA1UEChMJTWljcm9
        zb2Z0MSYwJAYDVQQLEx1QZXJzb25hbCBhbmQgQnVzaW5lc3MgU3lzdGVtczE3MDUGA1
        UEAxMuTWljcm9zb2Z0IERlbW8gQ0EgLS0gRm9yIFRlc3RpbmcgUHVycG9zZXMgT25se
        YIQUkMFyaAAfKoR0JtrD7asoDANBgkqhkiG9w0BAQQFAANBACJBMQ19GkgYwcbSShm5
        rjnWzgcyamyKVmODav3HDJEkyJRNm2QHBq2NGfQkFXx2zJHLSlP597Vr96g9NlX3uoI=
        -----END CERTIFICATE-----
        <insert blank line here>

3. Save the file and then attempt to install the certificate as before in Key
  Manager.

STATUS
======

Microsoft has confirmed this to be a problem with Microsoft Internet Information
Server version 3.0. We are researching this problem and will post new
information here in the Microsoft Knowledge Base as it becomes available.

MORE INFORMATION
================

The Verisign certificate is manufactured by Verisign, a vendor independent of
Microsoft; we make no warranty, implied or otherwise, regarding this product's
performance or reliability.

For additional information, please see the following article in the Microsoft
Knowledge Base:

  Q180018 : SGCINST.EXE Appears to Execute but SGC Does Not Work

Additional query words: 4.00
======================================================================
Keywords          : kb3rdparty kbsetup 
Technology        : kbiisSearch kbiis300
Version           : WinNT:3.0
Hardware          : ALPHA x86
Issue type        : kbprb

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.