Q164358: PRB: Handling Violation of Field Rules in Forms
Article: Q164358
Product(s): Microsoft FoxPro
Version(s): 5.0 6.0
Operating System(s):
Keyword(s): kbvfp kbvfp500 kbvfp600
Last Modified: 21-AUG-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Visual FoxPro for Windows, versions 5.0, 6.0
-------------------------------------------------------------------------------
SYMPTOMS
========
If the REVERT or HELP buttons are not desirable in the dialog box that Visual
FoxPro 5.0 presents for violations of Field Rules, it is possible to trap the
error and present a custom dialog box. These errors were not trappable in either
Visual FoxPro 3.0 or 3.0b.
RESOLUTION
==========
There are basically three potential workarounds for this situation:
The first can be with or without the use of classes. Using classes, however, is
recommended and the implementation below allows you to use the workaround on a
form not using any custom classes.
1. Create a custom Form Property called lFlagError.
2. In the Error Method of the Form, add the following code:
IF nError = 1582 && Field "name" validation rule is violated
THIS.lFlagError = .T.
ENDIF
3. In the LOSTFOCUS of any TextBox that is based on a field with a field rule,
add the following code:
IF THISFORM.lFlagError
NODEFAULT && Do not move Focus to Next Object
THISFORM.lFlagError = .F.
ENDIF
The second option involves modifying the Field Rule. Instead of having a field
rule that is merely an expression or a function that checks the condition and
then returns a True or False, change the expression into a Function (or modify
the existing function) so that it checks for the desired condition. In addition,
if the rule fails, REPLACE the field with a valid value or the DEFAULT VALUE, as
in the following example:
Current Rule: .NOT. EMPTY(<fieldname>)
Modified Rule*: MyCustomRule()
*Best placed in Store Procedures of the Database container
FUNCTION MyCustomRule()
IF EMPTY(<fieldname>)
REPLACE <fieldname> WITH ;
EVAL(DBGETPROP('<alias.fieldname','FIELD','DEFAULTVALUE'))
ENDIF
The third option makes use of a Timer. The SETFOCUS of the object that caused the
Rule violation cannot be called from within the Form's ERROR method due to the
Visual FoxPro Object Model. At the time of the error the current object is still
the object that caused the error and its LOSTFOCUS event has not yet occurred;
therefore, when the ERROR method code is finished, the object's LOSTFOCUS
occurs, moving it to the next object in the tab order, negating any SETFOCUS()
command in the ERROR method of the Form. The Timer allows the Object Model to
progress through normally and then move the focus back to the object that caused
the rule violation. Use the following steps to implement this workaround:
1. From the File menu, click New, and then click Class.
2. From the "Based On" combo box click Timer (for a name, use ErrTimer).
3. Choose a Class library to store the class in and click OK.
4. From the Class menu, click Property and name it - oObjRef.
5. In the Timer Method, enter the following code:
&& Turn the Timer back off
THIS.INTERVAL = 0
&& Tell the user there was an error
=MESSAGEBOX(MESSAGE(),48)
&& Put the user back in the control
THIS.oObjRef.SETFOCUS()
THIS.oObjRef=.NULL.
6. Create a form.
7. Add the following code to the form's ERROR method:
&& Check and see if the error was due to Rule Validation
IF nError = 1582
&& Store an object reference of the Current Control to the
&& custom property oObjRef
THIS.Errtimer1.oObjRef = THIS.ACTIVECONTROL
&& The interval can be critical, setting it to low and timing
&& problems occur, such as the Timer's custom property
&& not getting set.
THIS.Errtimer1.INTERVAL = 100
ENDIF
STATUS
======
This behavior is by design.
MORE INFORMATION
================
Steps to Reproduce Behavior
---------------------------
1. Issue the following commands in the Command window:
CREATE DATABASE beakrul
CREATE TABLE tTemp ;
(cFld1 c(3) CHECK .NOT. EMPTY(cFld1) ERROR 'Cannot be empty!')
CREATE FORM breakrul
2. Set the Form's BUFFERMODE to "2 - Optimistic."
3. Right-click on the form and click "Data Environment."
4. Right-click in the DataEnvironment Window and click "Add Table."
5. Select the above table.
6. Click Close to close the "Add Table or View" dialog box.
7. Click on a field in the Data Environment window and drag it onto the form.
8. Add a CommandButton to the Form.
9. Double-Click on the CommandButton.
10. In the CommandButton's CLICK method add the following code:
APPEND BLANK
THISFORM.REFRESH()
11. Save and run the form.
12. Click on the CommandButton.
13. Tab to the TextBox.
14. Type anything in the TextBox and hit Enter
15. Tab back to the TextBox.
16. Delete the contents of the TextBox and press Enter. The Field Validation
dialog box appears.
REFERENCES
==========
For more information about replacing values from field rules, please see the
following article in the Microsoft Knowledge Base:
Q158255 How To Modify a Rule's Table to Which It Belongs in VFP 5.0
Additional query words:
======================================================================
Keywords : kbvfp kbvfp500 kbvfp600
Technology : kbVFPsearch kbAudDeveloper kbVFP500 kbVFP600
Version : 5.0 6.0
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1986-2002.