KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q157332: Windows NT Hangs with Adaptec 2940 Enable Disconnect Set to No

Article: Q157332
Product(s): Microsoft Windows NT
Version(s): 4.0
Operating System(s): 
Keyword(s): kbhw kbHardware
Last Modified: 09-AUG-2001

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows NT Server version 4.0 
- Microsoft Windows NT Workstation version 4.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you start your computer, Windows NT 4.0 may stop responding (hang) at the
blue startup screen displaying the system processor and memory configuration.
When this occurs, no dots appear on the screen, and you receive no error
message. In addition, if you attempt to install Windows NT 4.0 from the 3 floppy
diskettes your system may hang on disk 3 while displaying "loading SCSI floppy
driver".

CAUSE
=====

This behavior can occur if the Enable Disconnect setting is set to No in the
SCSI configuration for the Adaptec 2940 SCSI controller in your computer.

RESOLUTION
==========

Set the Adaptec SCSI controller back to the default settings. To do so, follow
these steps:

1. Restart your computer. When the BIOS message for the Adaptec SCSI controller
  appears on the screen, press CTRL+A to enter the SCSI controller
  configuration tool.

2. Select SCSI Configuration from the menu.

3. Press F6 to load the default settings.

4. If the boot drive is not SCSI ID 0, go to the SCSI Boot Configuration menu
  under Additional Options and set the ID to match the drive that is the boot
  drive.

5. Restart the computer.

MORE INFORMATION
================

The Adaptec documentation recommends setting the Enable Disconnect setting to No
if there is only one drive on the bus to improve performance. The Aic78xx.sys
driver requires this setting to be set to Yes.

Additional query words: prodnt

======================================================================
Keywords          : kbhw kbHardware 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400
Version           : 4.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1986-2002.