KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q156612: Using WinNT 3.5x Uptomp.exe to Upgrade 4.0 Systems to multiproc

Article: Q156612
Product(s): Microsoft Windows NT
Version(s): WinNT:4.0
Operating System(s): 
Keyword(s): kbsetup
Last Modified: 08-AUG-2001

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows NT Workstation version 4.0 
- Microsoft Windows NT Server version 4.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

While trying to use the Uptomp.exe utility that shipped in the Windows NT
version 3.5x Resource Kit, the following error message may appear:

  The Txtsetup.sif file in the specified path is not formatted correctly.
  Verify the correct disk and files can be found in the specified path.

WORKAROUND
==========

To work around this problem, perform the following:

- Use the Uptomp.exe from the Windows NT 4.0 Resource Kit.

-or-

- Copy these files from the Windows NT 4.0 CD into a temporary directory on the
  system you want to upgrade to multiprocessor.

Select the HAL that applies to your computer from the list below and copy it to
the temporary directory.

Halast.dll    = "AST Manhattan SMP"
Halsp.dll     = "Compaq SystemPro Multiprocessor or 100% Compatible"
Halcbus.dll   = "Corollary C-bus Architecture"
Halmca.dll    = "IBM PS/2 or other Micro Channel-based PC"
Halapic.dll   = "MPS Uniprocessor PC"
Halmps.dll    = "MPS Multiprocessor PC"
Halncr.dll    = "NCR System 3000 Model 3360/3450/3550"
Haloli        = "Olivetti LSX5030/40"
Hal.dll       = "Standard PC"
Hal486c.dll   = "Standard PC with C-Step i486"
Halwyse7.dll  = "Wyse Series 7000i Model 740MP/760MP"

Then the following 5 files:

KERNEL32.DLL
WINSRV.DLL
NTDLL.DLL
NTKRNLMP.EXE
WIN32K.SYS

Copy the Txtsetup.sif file from the Windows NT 3.51 CD found under the supporting
platforms directory (i.e. copy D:\I386\Txtsetup.sif to the temporary
directory).

Modify the Txtsetup.inf (from Windows NT version 3.51) to add Win32k.sys under
these sections.:

[Smash]
win32k.sys = 1

[Files]
win32k.sys  = dx,d1,,2,0,0

Modify the Uptomp.inf file from the Windows NT 3.51 Resource Kit and add the
following entry under:

[SystemFilesToCopy] section:
Win32k.sys = 0, 2,

Run Uptomp.exe again, using the modified Uptomp.inf file, type in the temporary
directory name in the "NEW HAL FILE PATH" box, and then select the correct HAL
from the "HAL TO INSTALL" box.

The upgrade should complete without errors and successfully upgrade you to
Multiprocessor support. Restart the computer and when the Windows NT kernel
loads, ensure that it displays "Multiprocessor Kernel" during startup.

MORE INFORMATION
================

The Txtsetup.sif file that shipped with Windows NT 4.0 is not backwards
compatible with the Windows NT 3.5x resource utility Uptomp.exe.

Additional query words: reskit
======================================================================
Keywords          : kbsetup 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400
Version           : WinNT:4.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.