Q152841: Windows NT 4.0 Service Pack 3 Readme.txt File (40-bit)
Article: Q152841
Product(s): Microsoft Windows NT
Version(s): winnt:4.0 SP3
Operating System(s):
Keyword(s): kbother
Last Modified: 08-AUG-2001
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows NT Workstation version 4.0 SP3
- Microsoft Windows NT Server version 4.0 SP3
-------------------------------------------------------------------------------
SUMMARY
=======
This article contains a copy of the information in the Windows NT 4.0 Service
Pack 3 Readme.txt file (40-bit).
MORE INFORMATION
================
======================================================================
Microsoft Windows NT 4.0 Workstation
and Windows NT 4.0 Server
Service Pack 3 Readme File
======================================================================
(c) Copyright Microsoft Corporation, 1997
This document provides information about Microsoft Windows NT 4.0
Workstation and Windows NT 4.0 Server Service Pack 3, as well as
answers to questions you might have.
--------
Contents
--------
1.0 INTRODUCTION
1.1 What's New in Service Pack 3
1.2 Support for PowerPC Platform
1.3 Downloading and Extracting the Service Pack
2.0 INSTALLATION INSTRUCTIONS FOR WINDOWS NT 4.0 SERVICE PACK 3
2.1 Before You Install the Service Pack
2.2 Installing the Service Pack
2.3 Service Pack Uninstall
3.0 USER NOTES
3.1 Emergency Repair Disk
3.2 Adding New Components to the System
3.3 Installing Symbol Files from the Compact Disc
3.4 Remote Access Service PPP CHAP MD5 Authenticator Support
3.5 Microsoft DHCP Server
3.6 Unencrypted Passwords No Longer Sent by Default
3.7 Hardware Compatibility with Windows NT 4.0
4.0 LIST OF BUGS FIXED IN WINDOWS NT 4.0 SERVICE PACK 3
5.0 ADDITIONAL FIXES AND WORK-AROUNDS
5.1 Tape Drive Not Recognized by Windows NT
5.2 File Sharing Problems with Windows 95
5.3 Reinstalling Hilgraeve HyperTerminal Private Edition
5.4 Restoring Active Files and the Registry from Tape
5.5 LPR Printing
5.6 Updating Audio Drivers
6.0 NOTES FOR USERS OF THE 128-BIT VERSION OF WINDOWS NT 4.0
7.0 HOW TO OBTAIN THE NORTH AMERICAN (128-BIT) VERSION OF
SERVICE PACK 3
1.0 INTRODUCTION
-----------------
Service Pack 3 for Microsoft Windows NT 4.0 is easy to install from
within Windows NT and changes only those files that were originally
set up on the Windows NT Workstation or Windows NT Server system.
Service Pack releases are cumulative: they contain all previous fixes
and any new fixes made to the system.
1.1 What's New in Service Pack 3
---------------------------------
RPC Transport
This service pack includes new versions of the remote procedure call
(RPC) run-time dynamic-link library (DLL) and the RPC subsystem
service (Rpcss.exe). These changes provide enhanced support for RPC
message queuing, which is a feature of the upcoming Microsoft Message
Queue Server (MSMQ). In order to use message queuing in an RPC
client/server application on Windows NT 4.0, you must have Service
Pack 3 installed on both the client machine and the server machine.
You also need Beta 2 or later of MSMQ installed on both the client
machine and the server machine.
If you are developing RPC applications that support MSMQ, you need
the new RPC run-time DLL, the new RPC subsystem service, and the new
RPC header files and Microsoft Interface Definition Language (MIDL)
compiler (available in the Win32 Software Development Kit). Also,
RPC applications must support message queuing in order to use the
following new features:
The MIDL [message] attribute.
The ncadg_mq protocol sequence.
The RPC_C_MQ_* endpoint flags in the RPC_POLICY data structure.
The RpcBindingInqOption and RpcBindingSetOption functions.
For more information on using message queuing in your RPC
applications, see RPC Message Queuing in the Service Pack 3 SDK
Help file (see "Win32 APIs and SDK for Service Pack 3" later in
this file), or refer to the documentation in the upcoming MSMQ SDK.
CryptoAPI 2.0
The Microsoft Cryptography application programming interface
(CryptoAPI) provides developers with core cryptographic and
certificate functions. CryptoAPI 1.0 supports public-key and
symmetric-key operations, such as key generation, key management, key
exchange, encryption, decryption, hashing, digital signatures, and
verification of signatures. CryptoAPI 2.0 (the upgrade contained in
this service pack) includes this core cryptographic functionality as
well as certificate-based functionality. Developers can use
certificates with these public-key operations and perform the
necessary encapsulations and encoding to apply certificates within
their applications.
CryptoAPI 2.0 uses a service-provider model in which cryptography is
provided by Cryptographic Service Providers (CSPs). This model allows
developers to easily adapt their applications to evolving
cryptographic technologies and government export policies. Service
Pack 3 provides one CSP (the Microsoft RSA Base Provider), which
gives users and developers access to exportable cryptography.
CryptoAPI 2.0 supports existing standards, such as X.509 v.3
certificate formats, ASN.1 encoding, and both PKCS #7 and #10 for
encapsulation. This allows applications using CryptoAPI to
operate with other certificate-based systems that adhere to these
standards.
The release version of CryptoAPI 2.0 contains several updates to the
developer's release version of September 1996, including both
parameter changes and naming changes. These changes are reflected
in the Crypt32.dll and Wincrypt.h files. Please consult the
CryptoAPI 2.0 documentation for details.
DirectX 3.0
Service Pack 3 contains a complete software implementation of
DirectX 3.0 as well as ongoing hardware support for the DirectDraw
component of DirectX 3.0. This translates into the following major
feature changes since the release of DirectX 2.0 as supported in
Windows NT 4.0:
DirectDraw
Access to all 256 entries in the palette when in exclusive mode.
DirectSound
Software-based 3-D localization of audio (Direct3DSound APIs.)
DirectInput
COM interface supporting mouse and keyboard data with documentation
and sample programs.
DirectPlay
IDirectPlayLobby, an interface that allows an external application
to launch a DirectPlay 3.0 application and provide it with all
information necessary to connect to a session. Internet TCP/IP
service provider for multi-player applications over the Internet.
Direct3D
Software emulation for the Direct3D 3.0 API. (In Windows NT 4.0, we
provide a beta version of the software drivers for Direct3D 2.0.)
ODBC 3.0
Service Pack 3 includes the latest version of Microsoft Open
Database Connectivity (ODBC) API. ODBC 3.0 provides an updated ODBC
Control Panel and an ODBC Administrator interface that uses tabbed
controls and provides more information about the ODBC components
installed and in use on your system. This updated version of ODBC
also introduces the concept of a file data source that can be shared
or placed on a central server. With the appropriate drivers
installed, ODBC 3.0 will let a user share a file data source or
place a file data source on a central server.
This new version of ODBC adheres to the standards of both the
American National Standards Institute (ANSI) and the International
Standards Organization (ISO). It is also backward compatible with
previous versions of the ODBC API. For more information on ODBC
3.0, refer to the documentation included with the ODBC 3.0 SDK.
SMB Signing
Service Pack 3 includes an updated version of the Server Message
Block (SMB) authentication protocol, also known as the Common Internet
File System (CIFS) file sharing protocol. The updated protocol has two
main improvements: it supports mutual authentication, which closes a
"man-in-the-middle" attack, and it supports message authentication,
which prevents active message attacks. SMB signing provides this
authentication by placing a digital security signature into each SMB,
which is then verified by both the client and the server.
In order to use SMB signing, you must either enable it or require it
on both the client and the server. If SMB signing is enabled on a
server, then clients that are also enabled for SMB signing will use
the new protocol during all subsequent sessions and clients that are
not enabled for SMB signing will use the older SMB protocol. If SMB
signing is required on a server, then a client will not be able to
establish a session unless it is enabled for SMB signing. SMB signing
is disabled by default on a server system when you install the Service
Pack; it is enabled by default on a workstation system when you apply
the Service Pack. For information on how to configure SMB signing, go
to the Microsoft Knowledge Base at http://www.microsoft.com/kb/ and
search for the following article: Q161372 -- How to Enable SMB
Signing in Service Pack 3.
Note: SMB signing will not work with the direct host IPX protocol.
This is because the direct host IPX protocol modifies SMBs in
a way that is incompatible with signature-enabled SMBs. This
incompatibility will be most obvious when you have direct host
IPX clients and you require SMB signing on the server. Requiring
SMB signatures on the server will cause the server to not bind
to the direct host IPX interface, which will then force all
connections to the server to be signed. If you disable the NWLink
binding on the server then you will be able to use SMB signing.
Also, SMB signing will impose a performance penalty on your
system. Although it doesn't consume any more network bandwidth,
it does use more CPU cycles on the client and server side.
For more information on SMB signing, see the Microsoft FTP site at
ftp://ftp.microsoft.com/developr/drg/CIFS/sec.htm. For general
information on the CIFS protocol, see the Microsoft Web site at:
http://msdn.microsoft.com/workshop/networking/cifs/default.asp.
Password Filtering
This Service Pack includes a password filter (Passfilt.dll) that
allows system administrators to increase password strength. This
filter is copied to %system root%\SYSTEM32 when the Service Pack is
installed on the system. The password filter should be copied to
the primary domain controller for the domain, and to any backup
domain controllers in the event the server role in the domain
changes.
To use the password filter, the following registry entry must exist.
If it doesn't exist you must create it.
WARNING: Using the registry editor incorrectly can cause serious,
system-wide problems that may require you to reinstall Windows NT.
Microsoft cannot guarantee that any problems resulting from the use
of the registry editor can be solved. Use this tool at your own risk.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
Value: Notification Packages
Type: REG_MULTI_SZ
Data: Passfilt.dll
Notification Packages contains a list of DLLs to be loaded and
notified of password changes and password change requests. You can
audit the loading of Notification Packages by setting the audit policy
in User Manager. To do this, start User Manager and then click Audit
on the Policies menu. In the Audit Policy dialog box click Audit
These Events and then enable Restart, Shutdown, and System by
selecting the Success and/or Failure check boxes.
Passfilt.dll implements the following password policy:
1. Passwords must be at least 6 characters long.
2. Passwords must contain characters from at least 3 of the following
4 classes:
Class Examples
----- --------
English Upper Case Letters A, B, C, ... Z
English Lower Case Letters a, b, c, ... z
Westernized Arabic Numerals 0, 1, 2, ... 9
Non-alphanumeric characters .,;:*&%!
3. Passwords may not contain your user name or any part of your full
name.
Custom password filter DLLs can be written to implement different
password rules. For more information, see the Microsoft Knowledge Base
article Q151082 Password Change Filtering & Notification in Windows
NT. You can access the Knowledge Base at http://www.microsoft.com/kb/.
Restricting Anonymous User Access
Windows NT has a feature where anonymous logon users can list domain
user names and enumerate share names. Some customers who want enhanced
security have requested the ability to optionally restrict this
functionality. Service Pack 3 provides a mechanism for administrators
to restrict the ability for anonymous logon users (also known as NULL
session connections) to list account names and enumerate share names.
In addition, Service Pack 3 has a feature that restricts anonymous
logon users from connecting to the registry remotely. After
Service Pack 3 is installed, anonymous users cannot connect to the
registry and cannot read or write any registry data. Also, a new
built-in group known as Authenticated Users is created when you
install Service Pack 3. The Authenticated Users group is
similar to the Everyone group, except for one important difference:
anonymous logon users (or NULL session connections) are never members
of the Authenticated Users group.
For more information on these new features, including information
on configuring the registry to restrict anonymous user access to
list domain user names and enumerate share names, go to the Microsoft
Knowledge Base at http://www.microsoft.com/kb/ and search for the
following article: Q143474.
Using a System Key to Strongly Encrypt Password Information
Service Pack 3 provides the capability to use strong encryption
techniques to increase protection of account password information
stored in the registry by the Security Account Manager (SAM).
Windows NT stores user account information, including a derivative
of the user account password, in a secure portion of the registry
protected by access control and an obfuscation function. The
account information in the registry is only accessible to members
of the administrators group. Windows NT, like other operating
systems, allows privileged users who are administrators access to
all resources in the system. For users who require enhanced
security, strong encryption of account password derivative
information provides an additional level of security to prevent
administrators from intentionally or unintentionally accessing
password derivatives using registry programming interfaces.
The strong encryption capability in Service Pack 3 is an optional
feature. Strong encryption protects private account information by
encrypting the password data using a 128-bit cryptographically
random key, known as a password encryption key. Administrators may
choose to implement strong encryption by defining a system key for
Windows NT. To do this, administrators can run a utility called
Syskey.exe. For more information on using Syskey.exe to configure
a system key, go to the Microsoft Knowledge Base at
http://www.microsoft.com/kb/ and search for the following article:
Q143475.
Win32 APIs and SDK for Service Pack 3
Service Pack 3 includes several new APIs, including two Win32 APIs
pertaining to spin counts on critical sections
(InitializeCriticalSectionAndSpinCount() and
SetCriticalSectionSpinCount()). To develop applications that take
advantage of these new APIs, a Service Pack 3 SDK will be available
on the Microsoft Web site at:
http://msdn.microsoft.com/msdn/sdk
1.2 Support for PowerPC Platform
--------------------------------
Microsoft is in the process of phasing out all Windows NT-related
development for the PowerPC architecture. Because of this, there are
no PowerPC files included in Service Pack 3 for Windows NT 4.0.
Microsoft plans to continue providing technical support for customers
who use Windows NT 4.0 on the PowerPC architecture.
1.3 Downloading and Extracting the Service Pack
-----------------------------------------------
If you have downloaded this Service Pack from an FTP site or a Web
site, you should read the release notes completely before you
extract and install the Service Pack.
After downloading the Service Pack, you will have a compressed
executable file (for example, nt4sp3_i.exe) on your hard drive. To
extract this file and begin the installation process, type
nt4sp3_i.exe at the Command Prompt or double-click the file from
NT Explorer. You can also extract the file into the current
directory without launching the installation program by using
the Command Prompt switch /x (for example, at the Command Prompt,
type nt4sp3_i /x).
2.0 INSTALLATION INSTRUCTIONS FOR WINDOWS NT 4.0 SERVICE PACK 3
---------------------------------------------------------------
2.1 Before You Install the Service Pack
---------------------------------------
Close all active debugging sessions before installing this
Service Pack, otherwise the Update program will be unable to replace
system files that are in use. If a file is in use when you install
the Service Pack, a dialog box will appear in which you can choose to
cancel the installation or skip the file copy. We recommend you choose
to cancel the installation, and then run Update.exe again, being sure
to select the uninstall option. Close all active sessions on the
system, and then run Update.exe again to install the Service Pack.
Also, to maximize the ability to recover the system in the event of
installation failure, it is recommended that you do the following
before installing the Service Pack:
1. Update the system Emergency Repair disk using the Rdisk.exe
command with the /s option.
2. Perform a full backup of the system, including the system registry
files.
3. Disable any non-essential third-party drivers and/or services
(that is, drivers and services that are not required to boot
the system).
4. Contact the original equipment manufacturer (OEM) that provided
the driver or service for the updated versions of the file(s).
If you have installed a pre-release version of Microsoft
Internet Explorer 4.0 prior to installing this Service Pack, you
must remove the pre-release version of Internet Explorer 4.0 from
your computer before you install the Service Pack. You may then
reinstall Internet Explorer after successfully completing the
Service Pack 3 installation. This will not be necessary with the
retail release of Internet Explorer 4.0. Upon retail release,
Microsoft Internet Explorer 4.0 will be made available to
customers on the Microsoft Web site.
Users of NEC Versa 6050 or 6200 Series notebook computers that
shipped preinstalled with Windows NT version 4.0 should select
"Yes" when Service Pack 3 update.exe prompts you to replace the
hal.dll file.
If you are running SystemSoft's CardWizard for Windows NT (support
for PCMCIA) or PowerProfiler for Windows NT (support for Advanced
Power Management), you must complete critical pre-installation
procedures prior to installing this Service Pack. Otherwise, your
computer may no longer boot after installation of Service Pack 3.
These procedures can be found in the product section at
http://www.systemsoft.com.
Advanced Power Management is not supported by Windows NT version 4.0.
As a result, Microsoft recommends that you remove Advanced Power
Management features before installing this Service Pack.
2.2 Installing the Service Pack
-------------------------------
To install the Service Pack from the compact disc:
1. Insert the Service Pack compact disc into your CD-ROM drive.
2. If a Web page opens in your browser after you insert the
compact disc, click Windows NT Service Pack, and then
click Install Service Pack.
3. When you are asked whether you want to open the file
Spsetup.bat or save it to disk, click Open and then follow
the instructions that appear on the screen.
Note: To use the uninstall feature of this Service Pack,
you must create an Uninstall directory during the initial
installation. Also, if you are reapplying the Service
Pack after installing new software or hardware, you must
choose to create a new uninstall directory. To indicate
this, you must click "Yes, I want to create an Uninstall
directory" when you are prompted. For further information,
see Section 2.3 and 3.2.
4. If a Web page doesn't automatically open when you insert
the compact disc, open the Command Prompt window and change
the directory to the drive letter associated with the
CD-ROM drive.
5. Change the directory to \i386 or \ALPHA (depending
upon whether you have an Intel or ALPHA CPU), and type UPDATE.
6. Follow the instructions that appear on the screen.
Note: To use the uninstall feature of this Service Pack,
you must create an Uninstall directory during the initial
installation. Also, if you are reapplying the Service
Pack after installing new software or hardware, you must
choose to create a new uninstall directory. To indicate
this, you must click "Yes, I want to create an Uninstall
directory" when you are prompted. For further information,
see Section 2.3 and 3.2.
To install the Service Pack from a network drive:
1. At the Command Prompt, type the command to connect
to the network drive which has the Service Pack
files.
2. Change the drive letter to that network drive.
3. Change directory to \i386 or \ALPHA (depending
upon whether you have an Intel or ALPHA CPU), and
then type UPDATE.
4. Follow the instructions that appear on the screen.
Note: We recommend that you choose to create an Uninstall
directory the first time you install the Service Pack. Also,
if you are reinstalling the Service Pack after installing new
software or hardware, you must choose to create a new
Uninstall directory. To indicate this, click "Yes, I want
to create an Uninstall directory" when you are prompted.
For further information, see Section 2.3 and 3.2.
2.3 Service Pack Uninstall
---------------------------
This Service Pack contains an uninstall feature that you can use to
restore your system to its previous bootable state.
To enable the uninstall option, you must create an Uninstall
directory the first time you run Update.exe. To do this, when
prompted, click "Yes, I want to create an Uninstall directory." A
subdirectory in your Windows NT directory will be created. This
requires at least 60 MB of free space on the drive on which Windows
NT is installed.
To return your system to a previous bootable state, run Update.exe
and click "Uninstall a previously installed Service Pack." After
your system has restarted, the Update.exe program will replace the
files updated by the Service Pack with the files from the previous
installation and will return your registry settings to what they were
before Service Pack 3 was installed.
Note: If you install any applications that require Service Pack 3
or have bug fixes contained in Service Pack 3, performing an uninstall
could adversely affect those applications.
Note: If you plan to install an older service pack after uninstalling
Service Pack 3, take note of the following important precaution.
Service Pack 3 modifies the Security Account Manager (SAM) database
such that older versions of the SAMSRV.DLL and WINLOGON.EXE files no
longer recognize the database structure. Therefore, the uninstall
process does not restore these files when uninstalling Service Pack 3.
If you install a prior service pack (e.g., Service Pack 2) after
uninstalling Service Pack 3, click "No" on the "Confirm File Replace"
dialog boxes that ask if you wish to overwrite SAMSRV.DLL and
WINLOGON.EXE. If you overwrite the newer files with their older
versions, you will be unable to logon to the system.
3.0 USER NOTES
---------------
3.1 Emergency Repair Disk
-------------------------
If you use the Windows NT Emergency Repair Disk to repair your
Windows NT system at some time after you install the
Service Pack, you will need to reinstall the Service Pack after the
repair is completed. This is because the Emergency Repair Disk
repairs your system by restoring your original Windows NT 4.0 setup.
After the repair has completed, simply follow the Installation
Instructions (section 2.0) to reinstall the Service Pack. For more
information on using the Windows NT Emergency Repair Disk utility,
go to the Microsoft Knowledge Base at http://www.microsoft.com/kb/
and search for the following article: Q146887.
Note: To use the Emergency Repair Disk utility, you must have the
updated version of Setupdd.sys. The updated version is contained in
Service Pack 3. To update your version of Setupdd.sys, copy Setupdd.sys
from the Service Pack to your setup boot disk #2. This will
replace the older version of Setupdd.sys with the updated version.
For more information, go to the Microsoft Knowledge Base at
http://www.microsoft.com/kb/ and search for the following article:
Q158423.
3.2 Adding New Components to the System
---------------------------------------
If you change or add new software or hardware components to your
system after you have installed the Service Pack, you need to install
the Service Pack again. This is because the files taken from the
original Windows NT 4.0 disk set may not be the same as the files on
the Service Pack disk set. You cannot install new components directly
from the Service Pack media (such as a new keyboard or printer
driver). You must install new components from the original product
media and then reinstall the Service Pack.
For example, if you install the SNMP service after installing Service
Pack 3, you will need to reinstall the Service Pack. If you fail to do
so, you will receive the error "Entrypoint SnmpSvcGetEnterpriseOID
could not be located in snmpapi.dll." This is because some of the
files in the SNMP service have been updated in the Service Pack and
you have a version mismatch. Reinstalling the Service Pack fixes the
problem by copying the newer versions of the files to your system.
Note: If you are reinstalling the Service Pack after
installing new software or hardware, you must choose to create a
new uninstall directory. To indicate this, click "Yes,
I want to create an Uninstall directory" when you are prompted.
3.3 Installing Symbol Files from the Compact Disc
-------------------------------------------------
Each program file in Windows NT has a corresponding symbol file that
is used to find the cause of kernel STOP errors. To install the
symbol files corresponding to the new binaries in Service Pack 3, do
the following (assuming your CD-ROM drive is D:, your symbol files
are located in the C:\WINNT\SYMBOLS directory, and you are installing
the files for an x86 machine):
XCOPY /S /U /D D:\SUPPORT\DEBUG\I386\SYMBOLS
C:\WINNT\SYMBOLS
This will copy the Service Pack 3 .dbg files over the existing
versions of these files. The XCOPY command shown will copy only those
.dbg files that are already installed (/U switch), and only those
with a more recent time-date stamp (/D switch).
For more information about debugging on Windows NT, see Chapter 39,
"Windows NT Debugger," in the Microsoft Windows NT 4.0 Workstation
Resource Kit.
3.4 Remote Access Service PPP CHAP MD5 Authenticator Support
------------------------------------------------------------
Service Pack 3 provides limited PPP MD5-CHAP authenticator support to
the Remote Access Server, which may be useful for small user-count
environments using non-Microsoft PPP dial-in clients. The support is
local to a given RAS server. The MD5 account information is stored in
the RAS server registry and is not integrated or synchronized with
the User Manager account database. Integrated support will appear in
a later release, at which time this limited support may be removed.
The local MD5-CHAP authenticator is enabled by creating the MD5 key
below and adding "account" subkeys of the form [<domain>:]<user>,
with subvalue "Pw" containing the account password. The ":" notation
is used instead of "\" due to the syntax rules of registry keys. The
'domain:' is optional and typically omitted. MD5-CHAP will not be
negotiated (old behavior) when the MD5 key does not exist (default).
HKLM\SYSTEM\CurrentControlSet\Services\RasMan\PPP\CHAP\MD5
[<domain>:]<user>(REG_SZ)Pw
3.5 Microsoft DHCP Server
--------------------------
This version of the Microsoft DHCP Server modifies the format of the
DHCP database. You should back up the contents of your
%windir%\system32\dhcp directory prior to upgrading.
The address conflict detection feature can limit the throughput of
Microsoft DHCP Server. For improved performance, reduce the number of
ping retries in the Server Properties dialog box. This feature is
disabled by default.
Address conflicts are indicated by the replacement of the machine
name with "BAD_ADDRESS." If a Unique Identifier is specified for
the address in the Client Properties dialog box, then the address was
declined by the client. If the Unique Identifier is not specified,
then the address conflict was detected by the DHCP Server.
Microsoft DHCP Server can be configured to set a client's default
gateway equal to its IP address. This causes the client to use the
Address Resolution Protocol (ARP) for all IP addresses on the local
subnet and is useful for routerless networks. To enable this feature
for all clients in a scope, add the following value to the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DHCPServer
\Subnets\a.b.c.d\SwitchedNetworkFlag=1 (REG_DWORD)
This version of Microsoft DHCP Server supports BOOTP clients. BOOTP
addresses currently must be reserved in advance by creating an IP
address reservation. Future versions of Microsoft DHCP Server will
be capable of leasing dynamic addresses to BOOTP clients.
BOOTP clients that do not specify the parameter request list option
( 55 ) can still retrieve the following options from this release of
Microsoft DHCP Server:
1 Subnet Mask
3 Router
5 Name Server
12 Host Name
15 Domain Name
44 NetBIOS over TCP/IP Name Server
45 NetBIOS over TCP/IP Datagram Distribution Server
46 NetBIOS over TCP/IP Node Type
47 NetBIOS over TCP/IP Scope
48 X Window System Font Server
49 X Window System Display Manager
69 SMTP Server
70 POP3 Server
9 LPR Server
17 Root Path
42 NTP Servers
4 Time Server
In order to obtain other options, the client must specify option 55
in the BOOTP request. DHCP Server will return the options in the
order listed above. DHCP Server will return as many options as will
fit in response packet.
The activity log feature creates a text log file of all DHCP Server
activity. The file is located at:
%windir%\system32\dhcp\dhcpsrv.log
When the activity log feature is enabled this file will be kept open
by DHCP Server while the Server is running. To delete the activity
log file you must first stop DHCP Server, using the command:
NET STOP DHCPSERVER
If available disk space becomes low, the activity log will pause
until sufficient disk space becomes available.
You must also stop and restart the DHCP Service after enabling or
disabling Logging, Superscope, or DHCP Decline support.
3.6 Unencrypted Passwords No Longer Sent by Default
---------------------------------------------------
Connecting to SMB servers (such as Samba and LAN Manager for UNIX)
with an unencrypted (plain text) password fails after upgrading to
Windows NT 4.0 Service Pack 3. This is because the SMB redirector
in Service Pack 3 handles unencrypted passwords differently than
previous versions of Windows NT. Beginning with Service Pack 3, the
SMB redirector will not send an unencrypted password unless you add
a registry entry to enable unencrypted passwords. For information
on how to modify the registry, search the Microsoft Knowledge Base
at http://www.microsoft.com/kb/ for the following article: Q166730.
This article also contains information on how to change the
Service Pack setup process so that unencrypted passwords are
enabled after the Service Pack is installed.
3.7 Hardware Compatibility with Windows NT 4.0
----------------------------------------------
For a current list of computers and other hardware peripherals
supported by Windows NT 4.0, please see the Windows NT Hardware
Compatibility List at http://www.microsoft.com/hwtest.
4.0 LIST OF BUGS FIXED IN WINDOWS NT 4.0 SERVICE PACK 3
--------------------------------------------------------
All bug fixes contained in Service Pack 3 are listed below. You can
query the Microsoft Knowledge Base to find an article about a
specific bug by using the Qxxxxxx number that is assigned to the bug.
The Microsoft Knowledge Base can be found on the Microsoft Web site
at http://www.microsoft.com/kb/
Service Pack 1
--------------
Q78303 Intermittent File Corruption Problem
Q142653 STOP Message Occurs Calling GetThreadContext/SetThreadContext
Q142654 Winsock Memory Access Violation in Ws2help.dll Or Msafd.dll
Q142655 Stop Message Appears After Deleting ProductOption Registry Key
Q142656 Internet Explorer 3.0 on RISC Computer Cannot Connect to Host
Q142657 Data Corruption on Windows NT 4.0
Q142658 Internet Information Server Runs Out of Memory
Q149903 File Manager Performs a Move Instead of a Copy
Q156832 STOP Message when IBM Warp Client Connects to Windows NT 4.0
Service Pack 2
--------------
Q108261 Windows NT Hangs on Shutdown with Certain PCMCIA Devices
Q140065 Multi-Processor Systems Randomly Restart or Stop Responding
Q141375 Winstone 97 May Fail on Windows NT 4.0
Q141708 RAS Client IP Addresses Not Returned to Static Address godot
Q142634 Multiple Processes Are Able to Open the Same Winsock Port
Q142641 Internet Server Unavailable Because of Malicious SYN Attacks
Q142648 STOP 0x00000024 in Ntfs.sys
Q142656 Internet Explorer 3.0 on RISC Computer Cannot Connect to Host
Q142671 Backup Fails on Certain Directories Due to Lack of Permissions
Q142675 CSNW Sends Packets Greater Than Negotiated Maximum Packet Size
Q142686 First Line of Print Job Lost When Printing Using Lpdsvc
Q142687 Windows NT 4.0 Not Able to Read Some Compact Discs
Q142847 Bugcheck 0x1e Caused by Isotp.sys Driver
Q142903 Windows NT Ndis.sys and Netflx3.sys Performance Improvement
Q146336 Joystick in Windows NT 4.0 Does Not Work Properly
Q147363 AlphaServer Hangs on Install of Windows NT Version 4.0
Q147497 Matrox Video Driver May Fail on Alpha-based Computers
Q147552 Backup Always Reports Time as PM
Q148378 Setup of RAS with Multiple Modems Gives Slow Performance
Q148525 Removable Media Does Not Eject if Formatted in NTFS
Q148602 Running SNA Server 2.11 on the Windows NT 4.0
Q150815 Windows NT May Fail to Boot on Toshiba Portable Computers
Q153665 SPX Data Stream Type Header May Reset Unexpectedly
Q154556 Delegation Requires a Stop and Restart of the DNS Server Service
Q154620 Windows NT 4.0 DNS Server Loses the Forwarders Settings
Q154784 Windows NT Operating System SNMP OID Incorrect
Q155883 NT 4.0 Breaks SNA Server 2.x Server Communication Over IP
Q156091 Access Violation with Long NDS Context in CSNW/GSNW
Q156095 Replace Command with Space Character in the Path Does Not Work
Q156276 Cmd.exe Does Not Support UNC Names as the Current Directory
Q156324 Device Failure Message with Microchannel Network Adapter
Q156520 Logon Validation Fails Using Domain Name Server (DNS)
Q156578 Cannot Cancel Print Job on Windows NT 3.51 Shared Printer
Q156735 WOW Applications Stack Fault When Launched by a Service
Q156746 Print Jobs Are Deleted When Printer Is Resumed After Restart
Q156750 AddGroupNameResponse Frame from WinNT May Cause WFWG to Hang
Q156884 Problems Saving Event Viewer Log from Windows NT 4.0 to 3.51
Q156958 Serial Service Won't Stop with Serial Printer Installed
Q157279 Nwrdr.sys Fails Reading File with Execute Only Attribute
Q157289 Memory Leak Using RegConnectRegistry API
Q157494 PPC 4.0 Cirrus Driver Fails to Redraw & Fill Objects Correctly
Q157621 Personal Groups Not Visible If %Systemroot% Is Read-Only
Q157673 Policy Not Updated on Workstation
Q158142 WM_DDE_EXECUTE API Causes a Memory Leak in the WOW Subsystem
Q158387 RAS Server Cannot Use DHCP to Assign Addresses w/ PPTP Filtering
Q158587 16-Bit Named Pipe File Open Leads to WOW Access Violation
Q158682 Shortcuts Created Under NT 4.0 Resolve to UNC Paths
Q158707 DDE Destroy Window Code May Stop 0x0000001e in Windows NT 4.0
Q158796 Macintosh Clients Connected to WinNT Server Appear to Hang
Q158981 IBM Thinkpads 760ED and 760ELD May Hang During Shutdown
Q159053 NTFS Stream Limitation in Windows NT 4.0
Q159066 A Client Crash May Prevent an NTFS Volume Dismount
Q159071 NTFS Does Not Prevent a File Deletion During Rename
Q159072 An Account That Still Has System Access May Be Deleted
Q159073 Screen Corruption on Dell Laptops Using Cirrus Video
Q159075 Compression Is Not Supported on Quantum 4000DLT
Q159076 Windows NT 4.0 May Hang or Crash in Win32k.sys During Setup
Q159085 Windows NT Kernel Crashes While Processing WM_NCCREATE
Q159090 Delphi 2.00 and 2.01 Users Encounter Error 998
Q159091 German Time Zone Results in Incorrect Log Times
Q159092 Mouse Buttons Not Swapped on German Windows NT 4.0
Q159093 Windows NT Muldiv() Function Returns Incorrect Value
Q159095 STOP 0x0000001E in Win32k.sys When Exiting Applications
Q159098 WinNT 4.0 Resource Kit Utility "Remote Console" Client Fails
Q159105 Cannot Open Truncated File Names from Compact Discs
Q159107 Access Violation in AddAtom Inside Kernel32.dll
Q159108 SMP Full Duplex Adapter Configuration May Cause a Blue Screen
Q159109 ExitWindowsEx Does Not Work With NEC Power Switch Service
Q159110 CDFS Does Not Complete IRPs Correctly
Q159111 Multiprocessor Computer Hangs Under Stress Using Halsp.dll
Q159119 NTFS Generates Cross-Linked Files
Q159127 Bugcheck in Windows NT While Running POSIX Applications
Q159129 OpenGL Access Violation with Invalid OpenGL Context
Q159137 Moving Files Can Corrupt NTFS Partition
Q159141 CDFS Incorrectly Creates Short File Names for Some Files
Q159144 Dongle May Not Function Under Windows NT 4.0
Q159203 Unattended Install Prompts for New IP if Zero Is in Address
Q159204 IoCompletionPort Causes Blue Screen Error
Q159205 SFM File Type and Creator Properties Invalid
Q159206 Reactivation of Paused Print Queues Deletes Print Jobs
Q159309 Windows NT 4.0 RAS Not Releasing Static IP Addresses
Q159352 RPC over NetBIOS Programs Can't Call from Server to RAS Client
Q159447 Applications Testing for Directory Existence Fail
Q159450 Second Recursive Query Sent from DNS Server Is Broken
Q159594 Missing Eastern Europe FontSubstitutes in Registry
Q159910 Memory Corruption on a Windows NT Alpha Platform
Q159970 Slow List of Folders and Files with CSNW
Q159971 SetTimer() API Causes Memory Leak in the WOW Subsystem
Q159972 WinNT 4.0 May Not Return Valid Response for SMB Search Command
Q160015 2D Vector Performance on WinNT 4.0 Slower Than on 3.51
Q160055 Warning Event ID 4010 Generated on Windows NT LPD Server
Q160189 CSNW Cannot See More Than 32 Volumes Per Server
Q160190 RasSetEntryProperties Does Not Save a Full Path Script Name
Q160354 Mouse and Keyboard Can Disappear when Replacing Drivers
Q160370 Stop Screen 0x00000050 Caused by Fs_rec.sys
Q160372 Intermittent File Corruption when Compiling on NTFS Partition
Q160373 Adaptec Aic78xx Does Not Issue Multiple Tagged Commands
Q160377 File Size Data Does Not Remain Consistent After Defrag on NTFS
Q160392 Systems with 4 GB or More of RAM Cannot Boot Windows NT 4.0
Q160398 Cannot Read Files Greater than 4 GB
Q160404 Madge EISA Stops Responding on Alpha in Windows NT 4.0
Q160405 Video Memory Not Correctly Detected on Dell Latitude Laptops
Q160420 Changing Colors on Cirrus Logic Cards to 65k Can Cause Stop
Q160459 DNS Delegations May Fail
Q160470 Stop 0x0000000a IPX Sends Browser an Incomplete Datagram
Q160493 NWLNKRIP Data Structures Corruption when Using a Demand Dial NIC
Q160494 DNS Zone Transfer Fails After WINS Record Added
Q160497 Cache File Entries Disappear
Q160508 Unnecessary DNS Zone Transfers
Q160518 Zone Files in Multiples of 4 KB May Cause Access Violation
Q160583 Windows NT 4.0 with More Than 4 Processors May Stall & Reboot
Q160601 Bad Parameters Sent to Win32k.sys May Cause Stop Message
Q160603 No Output from DBMON Using OutputDebugString While Debugging
Q160604 Access Violation in security!SspQueryContextAttributesW
Q160606 Performance Enhancements for SQL Server Under Windows NT
Q160610 READ_REGISTER_ULONG Doesn't Preserve ULONG Semantics on Alpha
Q160649 STOP 0x0000000A in Ntoskrnl.exe at Logon to Windows NT 4.0
Q160650 Blue Screen When Closing Kernel Mode Handles from User Mode
Q160651 OpenGL May Cause an Exception 0xc0000090
Q160653 NTFS Fails Assertion Under High Stress During Transfer
Q160657 16-bit Version of Visual Basic 4 May Hang Windows NT 4.0
Q160658 Stop C0000021A Using MoveFileEx MOVEFILE_DELAY_UNTIL_REBOOT
Q160670 FPSCR is Not Being Saved Across Thread Context Switches
Q160671 Stop 0x0000007F May Occur on Compaq SystemPro
Q160678 Possible Access Violation in Win32k.sys Under High Stress
Q160702 Event 2006 Errors in Xcopy from WinNT 4.0 to OS/2 3.0 Client
Q160732 FIX: SQL Server 6.5 Service Pack 2 Fixlist (Part 2 of 2)
Q160791 Excel Charts Lose Color When Pasted into Word
Q160840 Sharing Violation When Accessing User Profiles
Q160894 Incoming Fax Jobs Do Not Appear in Print Queue
Q160964 0x0000001e When Printing Certain Documents from Windows NT 4.0
Q161201 NTBackup.exe from WinNT 3.51 SP5 Causes Verify Errors
Q161802 Stop 0x0000000A During Create File SMB
Q162157 Cyberbit Unicode Font Does Not Return Correct Charset
Q163055 DHCP Client May fail with NT 4.0 SP2 Multinetted DHCP Server
Q163736 Access Violation in DNS Manager when deleting cached domain
Q163772 Nested "for" Loops Using the '~' Operators Does not Work
Q163773 Brief 3.0 in NTVDM Consumes 100% Processor
Q163837 SNMP query to Windows NT returns same value for NTS and NTW
Service Pack 3
--------------
Q135707 Programs Run at Priority Level 15 May Cause Computer to Hang
Q139506 Connections to Share-Level Server May Fail
Q140419 Name Release Notfications Not Sent to WINS on Shut Down
Q140967 Changing Password in User Manager Does Not Permit Logon
Q141189 BUG: Wrong Error Code on NetBIOS Call When Using NWNBLNK
Q141381 Retail SP3 Clients Cannot Connect to SP3 Beta 1 Servers
Q142047 Bad Network Packet May Cause Access Violation (AV) on DNS Server
Q142609 Corruption Problem When Running DPMI Application
Q143470 Run Logon Scripts Synchronously Not Applied to New Users
Q143472 FPNW Blue Screens Accessing or Creating Folders with Long Paths
Q143473 Unattended Setup Stops Unexpectedly
Q147012 Activating /W Switch to Prevent Rebooting in WinNT
Q149538 System Restarts Every 5 Hours if Workstation to Server Upgrade
Q151926 Delayed WinLogon When Drive Mapped to Local Share
Q153220 DHCP Manager Error "No More Data Is Available"
Q154710 Cannot View Long File Names on Network in 16-Bit Programs
Q154939 CreateQueueJobAndFile Fails w/ Queues Other Than Print Queue
Q156410 STOP 0x1E or 0x50 Error on Multiprocessor DEC Alpha Computer
Q157077 Netstat Slow to List Large Numbers of Connections
Q157745 Command Extensions Cause Access Violation in Cmd.exe
Q158433 Re-creating Admin Shares Causes Exception Error
Q158548 Sysdiff Changes Dates on Files It Applies to WinNT
Q159060 Mouse Cursor Freezes or Fails with Microsoft IntelliMouse
Q159176 XADM: Store Stops Responding with High CPU Usage
Q159330 Map.exe Does Not Set Environment Variables Correctly
Q159998 Error Message: Error Access Is Denied
Q160386 Incorrect MediaType Parameter on IBM PCMCIA Token Ring Card
Q160405 Video Memory Not Correctly Detected on Dell Latitude Laptops
Q160990 DHCP Server Offers Duplicate IP Addresses for Windows NT
Q161038 Winsock Apps Fail on First Attempt at NetBIOS Name Resolution
Q161368 Service Pack 2 May Cause Loss of Connectivity in Remote Access
Q161432 WINS Static Entries Overwritten by Duplicate Group Names
Q161644 STOP 0x0000000A Sfmsrv.sys When Copying File to Mac Volume
Q161714 IPX Doesn't Function Correctly over Token Ring Source Routing
Q161830 Message from Unix Using Smbclient w/ Long Username Crashes
Q161838 Programs That Lock 0 Bytes at Byte 0 Lock Entire File
Q162077 Stop: 0x0000000A when Selecting NDS Map Objects
Q162096 SET: Drivers Fail to Load When I/O Address Is Above 0xFFF
Q162189 Macintosh Clients May Hang Temporarily with Multiple Mac Volumes
Q162396 Problem with DHCP Decline Feature in Service Pack 2
Q162404 Service Pack 5 Breaks Microsoft Mail Shared Using FPNW
Q162471 Windows NT 4.0 May Not Recognize SCSI Devices Using Nonzero LUNs
Q162563 WINS Restore Fails on Windows NT Server 4.0
Q162566 FPNW Causes Incomplete Display When Executed from Windows 95
Q162567 Telnet to Port 135 Causes 100 Percent CPU Usage
Q162616 Extra Form Feed with Passthrough Functions to Text Only Driver
Q162657 Choosing Default Domain Name for RAS Client Authentication
Q162774 Policy Editor Crashes When Using Large Custom ADM Files
Q162775 Access Violation in SPOOLSS when Printing to a Serial Printer
Q162778 WINS May Report Database Corruption w/ More Than 100 Owners
Q162881 RIP Table Sent While Shutting Down When Silent RIP Set
Q162926 STOP: 0x0x0000000A After Call to GlobalAddAtom()
Q162927 Telnetting to Port 53 May Crash DNS Service
Q163129 RAS Client Fails to Connect to Service Pack 2 Using NetBEUI
Q163143 STOP: 0x0000001E with Status C000009A
Q163196 New Windows NT PING.EXE Prevents Hanging Other TCP/IP Stacks
Q163202 Limit of the Number of Simultaneously Open Root Storage Files
Q163203 Remote Access Autodial Manager may fail for second user logon
Q163213 WebSTONE Benchmark of IIS May Show Poor Results for MP Systems
Q163214 RAS Script with Set IPADDR May Fail with 3Com Defender Add-on
Q163261 DEC ALPHA WinNT 4.0 Servers w/ SP2 Fail to Lease DHCP Addresses
Q163267 Delay While Establishing SPX II Connection
Q163318 Helpfile Word Lists May Be Rebuilt After Daylight Savings Change
Q163333 Autosynch Compatible COM Applications May Fail w/ FIFO Enabled
Q163383 Failure to Obtain IP Address Via DHCP on Token Ring w/ SP2
Q163431 16-Bit Application Stops Responding When Run on WinNT 4.0
Q163508 STOP 0xA in Ntfs.sys During Reboot
Q163512 Error: The Mapi Spooler has Shut Down Unexpectedly
Q163525 Delay When Saving Word 7.0 File to Windows NT 4.0 Server
Q163538 NTBackup Does Not Properly Eject Tapes on DLT Tape Devices
Q163614 HP LaserJet Series II Prints Extra Small Stripes or Points
Q163616 Cannot Unlock Workstation If Password Change Cancelled
Q163620 STOP 0x50 in Rdr.sys If Pathname Too Long in SMB
Q163672 Windows NT 4.0 Setup Fails on ThinkPad 535
Q163687 Winsock Applications May Timeout or Fail with an Error
Q163700 IIS Access Violation for Polygon with More Than 100 Vertices
Q163714 ATDISK Finds the Same Disk Twice on SunDisk PCMCIA ATA Adapter
Q163725 NDIS Driver Fails To Check Functional Address
Q163790 RPC Service Stops Responding on UDP Port 135
Q163872 Sysdiff Cannot Delete Files
Q163873 Czech Keyboard Layout Has Wrong Mapping
Q163874 Pressing CTRL+ALT+DEL When Logging On Can Cause Blue Screen
Q163875 Group Policies Not Applied If DC Name Is More Than 13 Characters
Q163876 CSNW Clients Cannot Delete Print Jobs on NetWare Print Queue
Q163880 COPY Command Causes File Cache to Grow
Q163881 Windows NT Does not Display Some Fonts
Q163883 NetBT (tag=Nbt8) Corrupts Pool with WinNT 4.0 SP2 Installed
Q163891 Microsoft Excel 97 Causes a Windows NT Access Violation
Q163892 A Service May Not Set Hooks on 32-bit GUI Applications
Q163936 CLOCK Hangs and Consumes 90% CPU When Set to Digital Display
Q163969 Event 552: DNS Was Unable to Serve a Client Request
Q164121 Corel Fonts Unavailable Outside of English Locale
Q164133 Logon Allowed When Access Denied to Mandatory User Profile
Q164138 Files in Macintosh Volume Disappear from Macintosh Clients
Q164159 Verify Reports Errors When Restoring a Tape Backup
Q164161 NTBACKUP Fails to Back up Microsoft Exchange Server Data
Q164201 Access Violation Installing IIS
Q164211 FPNW Doesn't Convert the Long File Names Correctly
Q164260 Compressing and Uncompressing Files Cause File Cache to Grow
Q164309 Windows NT Client: Primary/Secondary WINS Servers Switch
Q164322 Memory Leak in NetQueryDisplayInformation API
Q164350 NEC IDE CD-ROM Drive CDR-1400C Cannot Play Audio CDs
Q164352 Stop 0x00000050 in Tcpip.sys Caused by Winsock Applications
Q164391 WinNT 4.0 SP2 Atapi Claims IRQ for Unused IDE Channel
Q164410 CHGPASS and SETPASS Do Not Prompt For Typing Correction
Q164432 Accented Greek Characters Are Not Being Created
Q164462 Conner 4 mm DAT Tape Devices Fail After About 30 Seconds
Q164491 Stop: 0x0000000A in Rdr.sys When Mailslot Message > 512 Bytes
Q164507 Any User Can Log on to FTP Server with Disabled Anonymous Logon
Q164542 MGET to an IBM Host FTP Server Returns Garbage Characters
Q164546 SCSI Driver Description Truncated in Control Panel
Q164595 Duplicate Route Not Removed After Second Redirection
Q164600 4 mm DAT Driver Reports DEC TZ9L Supports Setmarks
Q164606 Deferred Reconnections to Password Shares May Not Work
Q164630 RPC over NetBEUI Fails from WinNT 4.0 RAS to WinNT 4.0 RAS
Q164631 Scavenging WINS Database Removes Static Entries
Q164639 SNA Windows 95 Fails Logon If Password Change Required
Q164702 WINDISK crashes during initialization when Compaq ATAPI PD/CD
Q164758 Remote Procedure Call (RPC) Service Access Violation
Q164806 CHKNTFS Does Not Exclude FAT Partitions from AUTOCHK on Boot
Q164812 Computer Name Truncated When Name Resolution Attempted
Q164821 DHCP Server Service May Stop Responding
Q164826 Direct Draw Programs May Hang NT 4.0 with S3 968 Video Chipset
Q164904 Stop 0x0000000A in NETBT.SYS After Applying Service Pack 2
Q164928 Not All Objects Are Displayed When Browsing NDS Trees
Q164938 Event Logging Frozen While Doing Heavy Logging; Services CPU Peg
Q164982 Lack of Secondary Address May Cause DNS Service to Hang
Q164987 Hard-coded Socket of 451 Causes LANtegrity Software to Fail
Q165004 NTVDM Support for Compaq Financial Keyboard Scan Codes
Q165245 DDE Client Experiences Intermittent DDE Disconnects
Q165314 Grace Logon Remaining Is Not Decremented When Logging to BDC
Q165388 Invalid Directory Returned When Attempting to Access FPNW
Q165427 Convlog.exe May Cause Access Violation
Q165443 NDS Login Script Fails When Checking "If Member Of"
Q165456 STOP 0x0000000A in Ntoskrnl.exe
Q165483 RasEnumEntries() API Leaks Memory
Q165813 16-bit Applications Cause Access Violation in NTDLL.DLL
Q165814 Stop: 0x0000001E When Opening My Computer
Additional query words: prodnt servpack SP1 SP2 SP3 bug fix qfe Compact disc s e r v p a c k SBK OPK
======================================================================
Keywords : kbother
Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400search kbWinNT400search kbWinNTW400sp3 kbWinNTSsearch kbWinNTS400sp3 kbWinNTS400search
Version : winnt:4.0 SP3
Hardware : ALPHA x86
Issue type : kbinfo
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1986-2002.