Q152234: XCLN: Exchange Client for Windows 95 Starts Very Slowly
Article: Q152234
Product(s): Microsoft Exchange
Version(s): winnt:4.0
Operating System(s):
Keyword(s): kbusage
Last Modified: 28-MAR-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Exchange Server, version 4.0
-------------------------------------------------------------------------------
SUMMARY
=======
The Microsoft Exchange client for Windows 95 might load slowly, or appear to
hang, if DNS is enabled for TCP/IP and no DNS server is available. This might
happen if a physical adapter is installed that does not use DNS and there is a
Dial-Up Adapter that uses DNS.
In Windows 95, the DNS setting is valid for all adapters that are present. You
cannot turn off DNS for one adapter and leave it on for another. It might be
necessary to manually disable DNS when switching between network adapters in
order for the Microsoft Exchange client for Windows 95 to load without a delay.
MORE INFORMATION
================
The Domain Name System (DNS) is used to identify computers on the Internet.
Windows 95 supports more than one network adapter for TCP/IP. The Dial-Up
Adapter allows Windows 95 to use a modem as a network adapter that can be used
to connect to the Internet with TCP/IP.
Usually, when connecting to the Internet with a Dial-Up Adapter, a DNS server
will be used as configured by choosing TCP/IP and the Dial-Up Adapter in the
Network applet of the Control Panel. However, enabling this setting for the
Dial-Up Adapter also enables it for all other adapters configured to use
TCP/IP.
If one adapter cannot access DNS, it will be necessary to disable DNS when using
that adapter. For example, if you use WINS for name resolution when at work, but
DNS when you connect to the Internet through Dial-Up networking, you will need
to disable DNS when at work. Re-enable DNS when you connect to the Internet
through Dial-Up networking.
The slowness may also be seen when a normally available DNS server is not
available. If you are not able to disable DNS, wait a few minutes for the
Microsoft Exchange client for Windows 95 to load after DNS fails.
Additional query words: smtp
======================================================================
Keywords : kbusage
Technology : kbExchangeSearch kbExchange400 kbZNotKeyword2
Version : winnt:4.0
Issue type : kbhowto
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1986-2002.