KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q152079: SNMP Traps Contain Invalid Agent ID Field

Article: Q152079
Product(s): Microsoft Windows NT
Version(s): winnt:3.51,4.0
Operating System(s): 
Keyword(s): kbnetwork kbWinNT400sp4fix kbSDKPlatform kbSNMP kbGrpDSNet
Last Modified: 08-AUG-2001

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows NT Workstation versions 3.51, 4.0 
- Microsoft Windows NT Server versions 3.51, 4.0 
- Microsoft Windows NT Server version 4.0, Terminal Server Edition 
-------------------------------------------------------------------------------


SYMPTOMS
========

The Agent ID field in SNMP traps do not contain the source computer's IP
address. The IP address, which is contained in this field, is always of the form
0.0.x.y where x.y is the decimal representation of the first four hexadecimal
digits of the computer's host name.

CAUSE
=====

If the computer has a host name which is exactly 12 characters long and consists
only of valid hexadecimal characters (1-9 and A-F), then the SNMP trap
generation code assumes that the host name is actually a valid IPX address and
places an invalid address in the Agent ID field.

RESOLUTION
==========

To work around this problem, perform one of the following:

- Make sure the host name is not 12 characters.

- Make sure one of the characters in the host name is not a valid hexadecimal
  character.

To resolve this problem, obtain the latest service pack for Windows NT 4.0 or
Windows NT Server 4.0, Terminal Server Edition. For additional information,
please see the following article in the Microsoft Knowledge Base:

  Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack


STATUS
======

Microsoft has confirmed this to be a problem in Windows NT 4.0 and Windows NT
Server 4.0, Terminal Server Edition. This problem was first corrected in Windows
NT 4.0 Service Pack 4.0 and Windows NT Server 4.0, Terminal Server Edition
Service Pack 4.


Microsoft has confirmed this to be a problem in Windows NT version 3.51. A
supported fix is now available, but has not been fully regression-tested and
should be applied only to systems experiencing this specific problem. Unless you
are severely impacted by this specific problem, Microsoft recommends that you
wait for the next Service Pack that contains this fix. Contact Microsoft
Technical Support for more information.



Additional query words: 3.51 4.00 prodnt TCP/IP simple network management protocol

======================================================================
Keywords          : kbnetwork kbWinNT400sp4fix kbSDKPlatform kbSNMP kbGrpDSNet 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351search kbWinNT400search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbNTTermServ400 kbNTTermServSearch kbWinNTS351search
Version           : winnt:3.51,4.0
Issue type        : kbbug
Solution Type     : kbfix

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1986-2002.