Q141300: Primary and Secondary WINS Servers in Unattended Setup
Article: Q141300
Product(s): Microsoft Windows NT
Version(s): 3.50 3.51
Operating System(s):
Keyword(s):
Last Modified: 08-AUG-2001
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows NT Workstation versions 3.5, 3.51
- Microsoft Windows NT Server versions 3.5, 3.51
-------------------------------------------------------------------------------
SUMMARY
=======
Only some of the TCP/IP protocol parameters can be defined at setup time in
unattended setup. Neither the unattend text file nor the IPINFO.INF file allow
the user to specify the WINS primary and secondary server IP addresses.
The IP address, subnet mask and default gateway can be specified in IPINFO.INF.
Changing WINS primary and secondary servers IP addresses can only be done by
editing the TCP/IP setup script file OEMNXPTC.INF.
MORE INFORMATION
================
The WINS primary and secondary server IP addresses are stored in a per- network
adapter key in the values NameServer (REG_SZ) and NameServerBackup (REG_SZ)
found under the HKEY_LOCAL_MACHINE subtree in the following key:
\SYSTEM\CurrentControlSet\Services\NetBT\Adapters\YourAdapter.
By default these two keys are not set. All network adapter's TCP/IP information
are set during TCP/IP configuration, after binding, as the binding process gives
the network adapters service names.
WORKAROUND
==========
WARNING: Modification of INF files can cause serious, system-wide problems
before and after Setup and may require you to reinstall Windows NT to correct
them. Microsoft cannot guarantee that any problems resulting from the
modification of INF files can be solved. Make INF modifications at your own
risk.
To resolve the problem, modify IPINFO.INF and OEMNXPTC.INF. This solution has
several limitations: it sets the same WINS primary and secondary servers IP
addresses for all network adapters, therefore it is not very adapted for a
multiple network adapters setup. On the other hand, after Setup it is impossible
to reset the two WINS servers IP addresses to none. In this case, restore the
CD-ROM OEMNXPTC.INF in %SystemRoot%\System32 after setup.
1. Copy the \I386 directory from the Windows NT compact disc to your hard drive.
2. Run expand -r OEMNXPTC.INF on your hard disk
3. Run del OEMNXPTC.INF
4. Modify the IPINFO.INF file to include the appropriate static IP values in the
[DefaultIPInfo] section. For additional information on how to do this, please
see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q135463
TITLE : IPINFO.INF Values Ignored During Setup
5. In OEMNXPTC.INF, search for the [InstallOptions] heading to find the
following problem code fragment:
ifstr(i) $(!STF_GUI_UNATTENDED) == YES
set EnableDHCPFlag = 1
endif
ifstr(i) $(EnableDHCPFlag) == ""
set EnableDHCPFlag = 0
endif
This problem is referenced in the following Microsoft Knowledge Base Article:
ARTICLE-ID: Q133337
TITLE : Automate Setup to Configure TCP/IP for Static Addressing Fails
6. In OEMNXPTC.INF, search for the following lines:
ForListDo $(OldCardList)
ifstr(i) $(CardServiceKey) == ""
ifstr $(CardList) == ""
set CardList = $($)
else
set CardList = $(CardList)"@"$($)
endif
debug-output "Doing:"$($)
debug-output $(CardList)
set DefaultIPAddress = *($(IPAddressList),$(CardCount))
set DefaultSubnetMask = *($(SubnetMaskList),$(CardCount))
7. Add the following lines right after the previous lines (Change first the
NameServer and NameServerBackup IP addresses below with the appropriate IP
addresses. A + indicates that the current line and the next line is one
complete line):
Debug-Output "OEMNXPTC.INF: Open netbtkey "$($)
OpenRegKey $(!REG_H_LOCAL) "" +
"System\CurrentControlSet\Services\NetBT\Adapters\"$($) +
$(MAXIMUM_ALLOWED) WinsParamKey
ifstr(i) $(WinsParamKey) != ""
EnumRegValue $(WinsParamKey) WinsList
QueryListSize WinsListSize $(WinsList)
Debug-Output "OEMNXPTC.INF: Wins list size = "$(WinsListSize)
ifint $(WinsListSize) != 0
; Value of NameServer : *(*($(WinsList),1),4)
ifstr(i) *(*($(WinsList),1),4) != ""
goto nowinsadd
endif
endif
set NewValueList = +
{{NameServer,$(NoTitle),$(!REG_VT_SZ),"135.135.2.8"},+
{NameServerBackup,$(NoTitle),$(!REG_VT_SZ),"135.135.7.1"}+
}
Shell $(UtilityInf), AddValueList, $(WinsParamKey) , +
$(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNXPTC.INF: ShellCode error: cannot write
wins servers addresses."
goto ShellCodeError
endif
nowinsadd = +
CloseRegKey $(WinsParamKey)
endif
8. To make use of the changes you have made, run Setup from the directory on
your hard drive.
Additional query words: prodnt
======================================================================
Keywords :
Technology : kbWinNTsearch kbWinNTWsearch kbWinNT351search kbWinNT350search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS351 kbWinNTS350 kbWinNTS351search kbWinNTS350search
Version : 3.50 3.51
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1986-2002.