Q134473: Cannot Configure Network with More than One Network Card
Article: Q134473
Product(s): Microsoft Windows 95.x Retail Product
Version(s):
Operating System(s):
Keyword(s):
Last Modified: 17-DEC-2000
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows 95
-------------------------------------------------------------------------------
SYMPTOMS
========
When you remove or disable a Plug and Play (PNP) network card and add a legacy
(ISA) network card, the PNP network adapter is redetected the next time you
restart the computer, or it may continue to run in real mode.
CAUSE
=====
Legacy network card support is an all-or-nothing proposition. All cards in the
system initialize in real mode if the NDIS2 network drivers are loaded. If you
remove the card using the Network applet in Control Panel, but leave the card on
the computer, Windows 95 automatically detects and configures the card again the
next time you start the computer. If you disabled the card using Device Manager,
the card still runs in real mode because its configuration is contained in the
Protocol.ini with the other cards that are installed.
RESOLUTION
==========
You can edit the Protocol.ini to remove information and bindings to the Plug and
Play card, and you can disable the card using Device Manager. However, this is a
temporary resolution; any time the network configuration is updated
(automatically or by using one of the Control Panel applets), Protocol.ini is
rewritten.
MORE INFORMATION
================
This problem usually occurs on computers that have networking chipsets built
into the motherboard. In other cases, you can physically remove the Plug and
Play network card from the computer to solve the problem. If you can run the
legacy card in protected mode only, then you can disable the Plug and Play card
and the system will function correctly.
Additional query words: pnp
======================================================================
Keywords :
Technology : kbWin95search kbZNotKeyword3
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1986-2002.