KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q132631: Setup Does Not Find CD-ROM Drive On HP Vectra Computer

Article: Q132631
Product(s): Microsoft Windows 95.x Retail Product
Version(s): 
Operating System(s): 
Keyword(s): 
Last Modified: 17-DEC-2000

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows 95 
-------------------------------------------------------------------------------

SYMPTOMS
========

The CD-ROM drive attached to your HP Vectra computer does not function properly
within Windows 95 and does not appear in Device Manager. Additionally, an
Adaptec SCSI device appears in Device Manager with a yellow exclamation point
next to it.

CAUSE
=====

Some HP Vectra computers include a DSP sound card with a built-in Adaptec
AID6x60 SCSI chip that is used to control the CD-ROM. The IRQ for this sound
card is software configurable and must be set with the /Q: switch in the
DEVICE=c:\xxx\DSP16.SYS line in the computer's Config.sys file. If this switch
is not present, the Adaptec SCSI chip will not have an IRQ and will not work
with the Windows 95 miniport driver for the device.

RESOLUTION
==========

Assign an unused IRQ to the DSP sound card. To do so, follow these steps:

1. Click the Start button, point to Settings, and then click Control Panel on
  the menu that appears.

2. In Control Panel, double-click the System icon, and in the System Properties
  dialog box, click the Device Manager tab, and then double- click Computer.

3. In the Computer Properties dialog box, make sure the Interrupt Request (IRQ)
  button is selected.

4. Locate an unused IRQ that is supported by the Adaptec SCSI device, and then
  click the OK button to close the Computer Properties dialog box.

5. In the System Properties dialog box, double-click the SCSI Controllers icon,
  select the Adaptec SCSI device, and then click Remove.

6. Add the /Q:<nn> switch (where <nn> is the unused IRQ you
  selected) to the DEVICE=C:\xxx\DSP16.SYS line of the Config.sys file, and
  then restart the computer.

7. When Windows 95 is running, click the Start button, point to Settings, and
  then click Control Panel.

8. In Control Panel, double-click the Add New Hardware icon, and have Windows 95
  detect the SCSI device.

After Windows 95 finishes detecting the device, the CD-ROM drive should be
functional and should be visible within Device Manager.

MORE INFORMATION
================

The third-party products discussed here are manufactured by vendors independent
of Microsoft; we make no warranty, implied or otherwise, regarding these
products' performance or reliability.

======================================================================
Keywords          :  
Technology        : kbWin95search kbZNotKeyword3

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.