KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q127729: X400: Sample TP4 Configuration Files

Article: Q127729
Product(s): Microsoft Mail For PC Networks
Version(s): MS-DOS:3.2
Operating System(s): 
Keyword(s): 
Last Modified: 05-NOV-1999

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Mail Gateway to X.400, version 3.2 
-------------------------------------------------------------------------------

SUMMARY
=======

The following are examples of the AUTOEXEC.BAT, CONFIG.SYS, and PROTOCOL.INI
files for an X.400 gateway using TP4 as the transport stack. It is assumed that
the gateway computer has a DEC DEPCA Ethernet card in it.

AUTOEXEC.BAT
------------

  Prompt $p$g
  Echo Off
  set path =c:\dos
  set tmp =c:\tmp
   
  lh doskey
  lh mouse
   
  @REM ==== LANMAN 2.2a ====
  SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
  c:\tp4\drivers\tp4.exe
  NET START workstation full
  LOAD NETBEUI
  NET LOGON
  @REM ==== LANMAN 2.2a ====

CONFIG.SYS
----------

  device=c:\dos\himem.sys /testmem:off
  device=c:\dos\emm386.exe noems /x=D000-DFFF
  dos=high,umb
  files=30
  shell=c:\dos\command.com c:\dos\ /p
   
  LASTDRIVE=Z
  DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
  DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\DEPCA\DEPCA.DOS
  device=c:\tp4\drivers\dli.dos

PROTOCOL.INI
------------

  [PROTMAN]
    DRIVERNAME = PROTMAN$
    DYNAMIC = YES
    PRIORITY = NETBEUI
   
  [CLNS]
    DRIVERNAME = CLNS$
    NTC        = 6
   
  [PLUTO]
    DRIVERNAME = PLUTO$
    BINDINGS   = "DEPCA_NIF"
    NBUF       = 4
    NTC        = 7
   
  [NETBEUI_XIF]
    Drivername = netbeui$
    SESSIONS = 6
    NCBS = 12
    BINDINGS = "DEPCA_NIF"
    LANABASE = 0
   
  [DEPCA_NIF]
   
  ; PROTOCOL.INI section for the DEC EtherWORKS (MC, LC, Turbo, & DEPCA)
  ; Adapters

      DriverName   = DEPCA$
      MaxMulticast = 12
      MaxTransmits = 32
      AdapterName  = DE200
      RamAddress   = 0xD000
      Interrupt    = 5
   
  ;  use Interrupt = 5 for turbo board

Additional query words:

======================================================================
Keywords          :  
Technology        : kbMailSearch kbMailGateSearch kbZNotKeyword3 kbMailGatex400320
Version           : MS-DOS:3.2

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.