KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q124357: Err Msg Using NET USE: System Error 1130 Has Occurred

Article: Q124357
Product(s): Microsoft Windows NT
Version(s): 3.50
Operating System(s): 
Keyword(s): 
Last Modified: 08-AUG-2001

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows NT Server version 3.5 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you use the NET USE command to connect to computer running Windows NT, the
following error message appears:

  System Error 1130 has occurred.
  Not enough server storage is available to process this command.

In some cases the following text is written to the Event Viewer system log:

  The server was unable to perform an operation due to a shortage of
  available resources.

     0000: 000c0000 005c0001 00000000 c00007d1
     0010: 00000000 c000009a 00000000 00000000
     0020: 00000000 00000000 000007d2 0000000b
     0030: 0000003c


RESOLUTION
==========

To correct this problem:

  WARNING: Using Registry Editor incorrectly can cause serious, system-wide
  problems that may require you to reinstall Windows NT to correct them.
  Microsoft cannot guarantee that any problems resulting from the use of
  Registry Editor can be solved. Use this tool at your own risk.

1. Run Registry Editor (REGEDT32.EXE).

2. From the HKEY_LOCAL_MACHINE subtree, go to the following key:

  \SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters

3. From the Edit menu, choose Add Value.

4. Use the following values:

  Value Name: MinFreeConnections
  Data Type: REG_DWORD
  Decimal: 5

5. Close Registry Editor.

6. Run Control Panel and choose Network.

7. Under Installed Network Software, highlight Server and then choose Configure.

8. Under Optimization, select Maximize Throughput for File Sharing and then
  choose OK.

9. Either shutdown and restart Windows NT, or from a command prompt, type the
  following two commands (pressing ENTER after each line):

  net stop server
  net start server

Additional query words: prodnt srv balance
======================================================================
Keywords          :  
Technology        : kbWinNTsearch kbWinNT350search kbWinNTSsearch kbWinNTS350 kbWinNTS350search
Version           : 3.50

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.