KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q119106: WFWG 3.11 Does Not Pass Requests to Novell DOSNP.EXE

Article: Q119106
Product(s): Microsoft Windows 3.x Retail Product
Version(s): WINDOWS:3.11
Operating System(s): 
Keyword(s): 
Last Modified: 31-OCT-1999

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows for Workgroups version 3.11 
-------------------------------------------------------------------------------

The following article contains information on the use of Windows for
Workgroups with third-party products or configurations that have not been
tested and are not supported by Microsoft.

If the steps or procedures described in this article do not function
properly, contact the manufacturer of the third-party product for more
information or use a supported configuration.

SYMPTOMS
========

Novell NetWare users implementing Novell Named Pipes Extender for DOS
(DOSNP.EXE) encounter problems with Windows for Workgroups 3.11 because Windows
for Workgroups does not allow INT 21 requests related to named pipes to be
passed down to this DOS terminate-and-stay-resident (TSR) program. This problem
occurs regardless of whether the Windows for Workgroups 3.11 network
configuration is set up for the monolithic IPX or the Open Datalink Interface
(ODI) implementation of the IPX protocol.

RESOLUTION
==========

To allow this TSR program to work under Windows for Workgroups 3.11:

1. In Windows for Workgroups Network Setup, choose support for the Novell
  NetWare network only.

2. In Control Panel, disable 32-bit file access.

3. Remove the DEVICE=IFSHLP.SYS from the CONFIG.SYS file and the
  DEVICE=IFSMGR.386 from the SYSTEM.INI file [386Enh] section.

MORE INFORMATION
================

The device driver IFSHLP.SYS is the Windows for Workgroups 3.11 Installable File
System real-mode component. The device driver IFSMGR.386 is the Windows for
Workgroups virtual device driver (VxD) which is the Installable File System
Manager. It passes all INT 21 calls to the appropriate Installable File System
(VFAT.386, VREDIR.386, or MS-DOS).

Removing these components is not supported by Microsoft and eliminates the
possibility for enabling the Windows for Workgroups 3.11 32-bit file access
performance feature.

Also, you have connectivity to the Novell network only; you do not have the
peer-to-peer Windows for Workgroups network.

The Novell NetWare products included here are manufactured by Novell, Inc., a
vendor independent of Microsoft; we make no warranty, implied or otherwise,
regarding these products' performance or reliability.

Additional query words: 3.11 dosnp dosnp.exe ipxodi error lsl netx vlm startnet.bat net.cfg

======================================================================
Keywords          :  
Technology        : kbAudDeveloper kbWFWSearch kbWFW311
Version           : WINDOWS:3.11

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1986-2002.