Q114944: Using WSSCNFG.EXE with Multiple-Configuration System Files
Article: Q114944
Product(s): Miscellaneous Windows Products
Version(s):
Operating System(s):
Keyword(s):
Last Modified: 13-JUN-2001
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows Sound System, version 2.0
-------------------------------------------------------------------------------
SUMMARY
=======
The Windows Sound System MS-DOS Configuration program (WSSCNFG.EXE) provides
dual-boot capability for your computer system; it provides a menu with both
default configuration and Sound Blaster compatibility selections. WSSCNFG.EXE
changes your CONFIG.SYS file by creating two sections; however, it does not
change your AUTOEXEC.BAT file. You can modify your AUTOEXEC.BAT file to create
two sections, which will improve the performance of your computer. Depending on
which menu selection you choose, specific files either load or do not load. Your
MS-DOS 6.0 "User's Guide" provides more information about using multiple
configurations.
MORE INFORMATION
================
Sample System Files Before Running WSSCNFG.EXE
----------------------------------------------
CONFIG.SYS:
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE NOEMS
DEVICEHIGH=C:\DOS\SETVER.EXE
FILES=60
BUFFERS=30
DOS=HIGH,UMB
SHELL=C:\DOS\COMMAND.COM C:\ /P /E:1024
AUTOEXEC.BAT:
SET TEMP = C:\TEMP
PROMPT $P$G
PATH = C:\DOS;C:\WINDOWS
LH C:\DOS\DOSKEY
WIN
Sample CONFIG.SYS File After Running WSSCNFG.EXE
------------------------------------------------
[Menu]
menuitem=default, default configuration
menuitem=Soundblastercompat,Sound Blaster Compatibility
[SoundBlastercompat]
DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE=C:\SNDSYS\EMM386.EXE 512 RAM
DEVICE=C:\SNDSYS\WSSXLAT.EXE SBIO=220 IRQ=7 DMA=1 WAVE=7 LINEIN=7
DOS=HIGH,UMB
BUFFERS=20
FILES=30
[Default]
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE NOEMS
DEVICEHIGH=C:\DOS\SETVER.EXE
FILES=60
BUFFERS=30
DOS=HIGH,UMB
SHELL=C:\DOS\COMMAND.COM C:\ /P /E:1024
To make more memory available and keep Windows from automatically loading when
you select the Sound Blaster compatibility selection (assuming you have the WIN
command at the end of the AUTOEXEC.BAT file), you can make changes to your
AUTOEXEC.BAT file so that only specific files are loaded depending on the option
selected from the startup menu.
Sample AUTOEXEC.BAT File After Making Manual Changes
----------------------------------------------------
goto %config%
:SoundBlasterCompat
rem lines in this section are only available in Sound Blaster Mode.
goto end
:Default
SET TEMP = C:\TEMP
PROMPT $P$G
PATH = C:\DOS;C:\WINDOWS
LH C:\DOS\DOSKEY
WIN
:goto end
:end
The above AUTOEXEC.BAT file provides only a small sample of what you can do using
Microsoft MS-DOS version 6.0 or later. For complete instructions about how to
alter your system files for multiple configurations, refer to page 105 of the
Microsoft DOS 6.0 "User's Guide."
Additional query words: 2.00 multi-config configure start Windows automatically
======================================================================
Keywords :
Technology : kbWinSoundSysSearch kbWinSoundSys200
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1986-2002.