Q113827: X400: 3.2 Setup and Maintenance Utilities
Article: Q113827
Product(s): Microsoft Mail For PC Networks
Version(s): MS-DOS:3.2
Operating System(s):
Keyword(s):
Last Modified: 12-NOV-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Mail Gateway to X.400, version 3.2
-------------------------------------------------------------------------------
SUMMARY
=======
Version 3.2 of Microsoft Mail Gateway to X.400 has different areas for setup and
maintenance. When you have installed the X.400 Gateway, use these three programs
to set it up and operate it:
- X.400 Gateway Administrator
This program sets up the X.400 Gateway. It is described in the "Microsoft
X.400 Gateway Administrator's Guide" in chapter 5 (Using the X.400 Gateway
Administrator Program) chapter 6 (Setting Up the Gateway) and chapter 8
(Operating and Administering the Gateway).
- X400GATE
This program runs the Gateway. It is described in the "Microsoft X.400 Gateway
Administrator's Guide," chapter 8 (Operating and Administering the Gateway).
- Microsoft Mail Administrator
This program sets up each postoffice for Microsoft Mail. Use it for the
procedures described in the "Microsoft X.400 Gateway Administrator's Guide,"
chapter 7 (Maintaining X.400 Addresses and Backbone Connections). For more
information about this program, see the "Microsoft Mail Administrator's
Guide."
MORE INFORMATION
================
The X.400 Gateway Administrator and X400GATE programs are part of the Microsoft
Mail Gateway to X.400 and are installed on the gateway postoffice. The Microsoft
Mail Administrator program and Microsoft Mail External program are installed
when you install Microsoft Mail.
You can run the X400GATE program only from the Gateway PC. You can run the X.400
Gateway Administrator program from any PC on the LAN that has access to the
gateway postoffice.
Here is when to use each program:
Task Program
Set up backbone connections Microsoft Mail Administrator
Define the local MTA X.400 Gateway Administrator
Define remote MTAs X.400 Gateway Administrator
Route the mail X.400 Gateway Administrator
Set up address conversion strings X.400 Gateway Administrator
Set up customized address mapping X.400 Gateway Administrator
Set up X.400 profile X.400 Gateway Administrator
Specify gateway parameters X.400 Gateway Administrator
Map bodyparts X.400 Gateway Administrator
Set the schedule X.400 Gateway Administrator
Print the configuration report X.400 Gateway Administrator
Maintain the X.400 Address List Microsoft Mail Administrator
Maintain the Postoffice Address List Microsoft Mail Administrator
Run the gateway X400GATE
View and print a log file X.400 Gateway Administrator
Return mail Microsoft Mail Administrator
Delete mail Microsoft Mail Administrator
Additional query words: 3.20
======================================================================
Keywords :
Technology : kbMailSearch kbMailGateSearch kbZNotKeyword3 kbMailGatex400320
Version : MS-DOS:3.2
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1986-2002.