KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q107995: NDIS2 Drivers Load but NDIS3 Drivers Don’t–Errors 6200 & 58

Article: Q107995
Product(s): Microsoft Windows 3.x Retail Product
Version(s): WINDOWS:3.11
Operating System(s): 
Keyword(s): 
Last Modified: 24-SEP-1999

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows for Workgroups version 3.11 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you start Windows for Workgroups, you may receive one of the following
error messages:

  Error 6200: Adapter <adapter-name> not found

  -or-

  Error 58: The network has responded incorrectly

NOTE: These errors usually occur in protected mode; real-mode networking usually
loads correctly.

CAUSE
=====

The above error messages may be caused by an incorrect I/O base address, an
incorrect RAM address, or an improper IRQ setting in the PROTOCOL.INI file.

These errors may be generated if the Transport= line in the [386Enh] section of
the SYSTEM.INI contains protocols that are not in use. For example, if the
Transport= line contains the following

       Transport=netbeui.386,nwlink.386,nwnblink.386

but the only protocol in use is NetBeui, the errors may occur.

RESOLUTION
==========

Correct the invalid setting.

If the Transport= line contains invalid references, remove them (that is, remove
the references to nwlink.386, nwnblink.386, and IPX/SPX compatible transport).

MORE INFORMATION
================

The NDIS2 network interface card (NIC) driver may not rely on the PROTOCOL.INI
settings; however, the NDIS3 NIC driver relies almost exclusively on these
settings.

Additional query words: 3.11 error message err msg enhanced mode protect NDIS tshoot

======================================================================
Keywords          :  
Technology        : kbAudDeveloper kbWFWSearch kbWFW311
Version           : WINDOWS:3.11

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.