KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q105154: How AppleTalk Routers Function in Internet Communications

Article: Q105154
Product(s): Microsoft LAN Manager
Version(s): 
Operating System(s): 
Keyword(s): 
Last Modified: 27-FEB-2002

SUMMARY
=======

LocalTalk networks are different from PC networks and require you to consider
special concepts and issues when setting them up. Most LocalTalk networks are
internets--separate physical networks connected by routers that enable network
communications by maintaining a map of the physical network on the internet and
forwarding data to the correct network destinations.

Seed routers provide other specialized internet functions. For more information
on them see Q105155.

ROUTING TABLE MAINTENANCE PROTOCOL (RTMP)
-----------------------------------------

AppleTalk uses routing table maintenance protocol (RTMP) to maintain information
about internetworking addresses and connections. Routers provide interfaces for
RTMP and numerous other protocols and processes.

The routing table contains all possible destination network numbers (or the
network range) and five entries necessary for forwarding datagrams:

- the number of the data link port that connects to the local network's DDP

- the destination network number

- the next router's node ID

- the number of hops needed to reach the destination network

- a cross-reference into the zone information table

The routers use RTMP to exchange this routing information, keeping their tables
current and minimizing internetwork delays.

ZONE INFORMATION PROTOCOL (ZIP)
-------------------------------

The zone information protocol (ZIP) maintains a zone information table that the
name binding protocol (NBP) uses to match networks with their zones. ZIP also
helps routers maintain their tables.

EXAMPLE
-------

If you send a job across a router to a printer. A sniff of the request will show
you the process stages:

- When the printing process begins, you will see RTMP and ZIP packets. These
  update the routers.

- Then, an NBP request to find the printer, something resembling:

         NBP Request ID=XX (=:LaserWriter@zonename)

- After the logical connection is initiated, the printer access protocol (PAP)
  starts a connection.

- When this connection is confirmed, data transmission starts.

The process for a file request is very similar, although it uses the file access
protocol (FAP) instead of the printer access protocol (PAP). If you are looking
for network or broadcast problems, use the ZIP and RTMP packets to verify that
the information (number of hops and network ranges) is correct.

Additional query words: 1.0a macfile localtalk osi

======================================================================
Keywords          :  

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.