Q99099: Procedure for Upgrading LMSFM on a Headless 3Server

Article: Q99099
Product(s): Microsoft LAN Manager
Version(s): 
Operating System(s): 
Keyword(s): 
Last Modified: 30-JUL-2001

SUMMARY
=======

The upgrade instructions provided with LAN Manager Services for Macintosh 1.0a
do not cover the procedures necessary for upgrading a headless 3Server. The
upgrade can be accomplished by using REMSETUP and following the slightly altered
upgrade procedure outlined below.

MORE INFORMATION
================

To upgrade your 3Server from LMSFM 1.0 to LMSFM 1.0a you need:

- The "LAN Manager Services for Macintosh Installation for 3Servers" disk that
  came with your LAN Manager for 3Servers tape.

- The "LAN Manager Services for Macintosh 1.0a Setup" disk.

The modified procedure for 3Servers is:

1. At the workstation that you use for remotely administering your 3Server, make
  a remote drive connection to the ADMIN$ share on your 3Server. For example:

  net use x: \\3server\admin$

2. Copy the files LANMAN.INI and PROTOCOL.INI from drive X to a safe backup
  location. For example:

  copy x:\lanman.ini c:\temp\lanman.bak
  copy x:\protocol.ini c:\temp\protocol.bak

3. Make a command line Remote Administration connection to the 3Server. For
  example:

  net admin \\3server /c

4. At the Remote Administration prompt, stop the MACFILE and MACPRINT services
  on the 3Server. For example:

  net stop macfile
  net stop macprint

5. Exit the Remote Administration prompt as follows:

  exit

6. Change to drive X and execute the REMSETUP program.

  x:
  "remsetup" (without the quotation marks)

7. From the Connectivity menu, choose "Macintosh Services."

8. When the Macintosh Services dialog is displayed, choose Remove. Choose Yes in
  response to all the prompts, until removal is complete.

9. When removal is complete, from the Connectivity menu, choose Install.

10. Insert the "LAN Manager Services for Macintosh Installation for 3Servers"
  disk in your workstation when prompted.

11. When prompted for the Mac Setup disk, insert the LAN Manager 1.0a upgrade
  disk into your workstation.

12. Installation will run. When prompted, select and configure the appropriate
  network cards to which LMSFM is to be bound.

13. When installation is complete, from the LAN Manager menu, choose Exit Setup.

14. Copy the backup versions of LANMAN.INI and PROTOCOL.INI that you created in
  step 2 back to drive X. For example:

  copy c:\temp\lanman.bak x:\lanman.ini
  copy c:\temp\protocol.bak x:\protocol.ini

15. Shutdown and reboot the 3Server.

Additional query words: sfm 2.20 2.2 1.0 1.0a

======================================================================
Keywords          :  

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1986-2002.