KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q96851: MS-DOS 6.0 Configuration Questions and Answers

Article: Q96851
Product(s): Microsoft Disk Operating System
Version(s): MS-DOS:6.0
Operating System(s): 
Keyword(s): msdos
Last Modified: 03-DEC-1999

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft MS-DOS operating system version 6.0 
-------------------------------------------------------------------------------

SUMMARY
=======


1. Q. I receive the message "ERROR: Unable to control A20 line" during the
  startup (boot) process. How can I correct this problem?

  A. The A20 line is a hardware component of 80286 and higher processors that
  allows programs to access the first 64 kilobytes (K) of extended memory.
  HIMEM.SYS must be able to control the A20 line to manage the extended memory
  on your computer. Different computers use different techniques for
  controlling the A20 line. In some cases, HIMEM.SYS cannot determine the
  correct technique to use. If HIMEM.SYS cannot identify the correct technique
  for controlling the A20 line on your computer, you may need to use the
  /MACHINE switch with the DEVICE=C:\DOS\HIMEM.SYS command in your CONFIG.SYS
  file. For further instructions, refer to the "Diagnosing and Solving
  Problems" chapter of the "Microsoft MS-DOS 6 User's Guide." You can also type
  "HELP HIMEM.SYS" (without the quotation marks) at the MS-DOS command prompt
  and press ENTER for information on HIMEM.SYS and the /MACHINE switch.

2. Q. I'm using custom menu colors with multiple configurations. During the
  startup process, my menu colors change back to the default screen colors. Why
  is this occurring?

  A. When ANSI.SYS is loaded, it resets your screen colors. ANSI.SYS is an
  enhanced console device driver; therefore, it takes over all output to the
  console. At this time, no workaround is available for this problem.

3. Q. How do I add the Windows(TM)-based utilities after I install MS-DOS 6.0?

  A. The MS-DOS 6 Upgrade includes Windows-based versions of Microsoft Backup,
  Microsoft Anti-Virus, and Microsoft Undelete. To install these programs after
  you have installed MS-DOS 6.0, insert Setup Disk 1 in your floppy disk drive.
  At the MS-DOS command prompt, type the following command and press ENTER

  " <drive>: setup /e" (without the quotation marks)

  where <drive> is your floppy disk drive.

  For more information on the Windows-based utilities, refer to the "Microsoft
  MS-DOS 6 User's Guide."

Additional query words:

======================================================================
Keywords          : msdos 
Technology        : kbMSDOSSearch kbMSDOS600
Version           : MS-DOS:6.0
Issue type        : kbinfo

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1986-2002.