KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q96079: WFWG: List of NCB Return Codes and Comments

Article: Q96079
Product(s): Microsoft Windows 3.x Retail Product
Version(s): WINDOWS:3.1
Operating System(s): 
Keyword(s): 
Last Modified: 26-SEP-1999

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows for Workgroups version 3.1 
-------------------------------------------------------------------------------

SUMMARY
=======

The following table lists all the possible network control block (NCB) return
codes and comments used in Windows for Workgroups.

MORE INFORMATION
================

  NRC_GOODRET     0x00   good return
  NRC_BUFLEN      0x01   illegal buffer length
  NRC_BFULL       0x02   buffers full, no receive issued
  NRC_ILLCMD      0x03   illegal command
  NRC_CMDTMO      0x05   command timed out
  NRC_INCOMP      0x06   message incomplete, issue another command
  NRC_BADDR       0x07   illegal buffer address
  NRC_SNUMOUT     0x08   session number out of range
  NRC_NORES       0x09   no resource available
  NRC_SCLOSED     0x0a   session closed
  NRC_CMDCAN      0x0b   command canceled
  NRC_DMAFAIL     0x0c   PC DMA failed
  NRC_DUPNAME     0x0d   duplicate name
  NRC_NAMTFUL     0x0e   name table full
  NRC_ACTSES      0x0f   no deletions, name has active sessions
  NRC_INVALID     0x10   name not found or no valid name
  NRC_LOCTFUL     0x11   local session table full
  NRC_REMTFUL     0x12   remote session table full
  NRC_ILLNN       0x13   illegal name number
  NRC_NOCALL      0x14   no callname
  NRC_NOWILD      0x15   cannot put * in NCB_NAME
  NRC_INUSE       0x16   name in use on remote adapter
  NRC_NAMERR      0x17   called name cannot == name or name #
  NRC_SABORT      0x18   session ended abnormally
  NRC_NAMCONF     0x19   name conflict detected
  NRC_IFBUSY      0x21   interface busy, IRET before retrying
  NRC_TOOMANY     0x22   too many commands outstanding, retry later
  NRC_BRIDGE      0x23   ncb_bridge field not 00 or 01
  NRC_CANOCCR     0x24   command completed while cancel occurring
  NRC_RESNAME     0x25   reserved name specified
  NRC_CANCEL      0x26   command not valid to cancel
  NRC_MULT        0x33   multiple requests for same session
  NRC_MAXAPPS     0x36   max number of applications exceeded
  NRC_NORESOURCES 0x38   requested resources are not available
  NRC_SYSTEM      0x40   system error
  NRC_ROM         0x41   ROM checksum failure
  NRC_RAM         0x42   RAM test failure
  NRC_DLF         0x43   digital loopback failure
  NRC_ALF         0x44   analog loopback failure
  NRC_IFAIL       0x45   interface failure
  NRC_ADPTMALFN   0x50   network adapter malfunction
  NRC_PENDING     0xff   asynchronous command is not yet finished

Additional query words: 3.10

======================================================================
Keywords          :  
Technology        : kbAudDeveloper kbWFWSearch kbWFW310
Version           : WINDOWS:3.1

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.