KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q92587: Standard Mode Boot Process for Windows for Workgroups

Article: Q92587
Product(s): Microsoft Windows 3.x Retail Product
Version(s): WINDOWS:3.1
Operating System(s): 
Keyword(s): 
Last Modified: 23-SEP-1999

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows for Workgroups version 3.1 
-------------------------------------------------------------------------------

SUMMARY
=======

In Windows for Workgroups, the standard-mode startup ("boot") process is
slightly different than the process for Windows version 3.1. This article
describes the procedure for starting Windows for Workgroups in standard mode.

MORE INFORMATION
================

The following procedure starts the network connections and Windows for
Workgroups in standard mode.

1. The user starts the network software by typing "net logon" (without the
  quotation marks) at the MS-DOS command prompt. If the user logs onto the
  network successfully, the persistent network connections are restored (for
  example, file and printer connections active during the last Windows for
  Workgroups session.)

2. The user starts WIN.COM by typing "win" (without the quotation marks) at the
  MS-DOS command prompt.

  Note: If you are using a 386 machine and you type "win", your system attempts
  to start in enhanced mode. Type "win/s" (without the quotation marks) to
  enter standard mode.

3. WIN.COM invokes the MS-DOS EXEC function to load DOSX to provide extended
  memory access support.

4. DOSX loads the standard-mode kernel (KRNL286.EXE).

5. KRNL286.EXE loads the following files:

   - The Windows drivers (identified as *.DRV in the SYSTEM.INI file)

   - GDI.EXE

   - USER.EXE

   - Supporting files (for example, fonts)

   - WFWNET.DRV (the Windows for Workgroups network driver)

6. WFWNET.DRV loads the Network DDE background application (NETDDE.EXE) and the
  ClipBook Server background application (CLIPSRV.EXE).

7. WFWNET.DRV prompts the user to log on to the network if the user has not done
  so already. If the user logs on to the network successfully, the WFWNET.DRV
  then restores the persistent network connections (for example, file and
  printer connections active during the last Windows for Workgroups session).

8. KRNL286.EXE launches the Windows shell identified by the shell= entry in the
  [boot] section of the SYSTEM.INI file. By default, this is the Windows
  Program Manager.

REFERENCES
==========

"Windows for Workgroups Resource Kit," Windows version 3.1, pages 2-15

Additional query words: 3.10

======================================================================
Keywords          :  
Technology        : kbAudDeveloper kbWFWSearch kbWFW310
Version           : WINDOWS:3.1

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1986-2002.