KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q90371: NetBIOS Applications and Windows for Workgroups

Article: Q90371
Product(s): Microsoft Windows 3.x Retail Product
Version(s): WINDOWS:3.1,3.11
Operating System(s): 
Keyword(s): 
Last Modified: 26-SEP-1999

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows for Workgroups versions 3.1, 3.11 
-------------------------------------------------------------------------------

SUMMARY
=======

Windows for Workgroups fully supports NetBIOS-based applications (such as Lotus
Notes). NetBIOS functionality within Windows for Workgroups is provided by the
NDIS NetBEUI protocol or transport.


Novell NetWare offers NetBIOS support by using a terminate-and-stay- resident
(TSR) program called NETBIOS.EXE. To enable NetBIOS support under Novell
NetWare, NETBIOS.EXE must be loaded.

NOTE: NETBIOS.EXE is not provided with Windows for Workgroups. If you have an
earlier installation of NetWare on your machine, you should be able to use the
NETBIOS.EXE TSR program available from that installation.

MORE INFORMATION
================

Using the Novell NETBIOS.EXE TSR program with Windows for Workgroups requires
some manual modifications to your AUTOEXEC.BAT and SYSTEM.INI files. The
following steps enable NETBIOS.EXE to support NetBIOS across the MSIPX
transport.

NOTE: Make sure that NETBEUI is at LANA0. If you have IPX (Novell) at LANA0, MSD
cannot recognize NETBIOS. Moving NETBEUI to LANA0 and IPX to LANA1 and using NET
START NETBEUI enables MSD to recognize NETBIOS.

1. Install the NetWare support in Windows for Workgroups. You can do this in the
  Network area in Control Panel.

2. Edit your AUTOEXEC.BAT file and add "C:\NETWARE\NETBIOS.EXE" (without the
  quotation marks) so that it is loaded after all the following network
  commands:

     net start               <-- WFWG command to initialize network
     msipx.com               <-- WFWG NetWare IPX transport
     netx.com /ps=lanlord    <-- WFWG NetWare shell
     login lanlord/jane      <-- WFWG NetWare login to NetWare server

  Make sure that the NETBIOS.EXE TSR program is loaded before you start Windows.

3. Edit your SYSTEM.INI file in your WINDOWS directory. In the [386Enh] section,
  add the line "V86MODELANAS=0" (without the quotation marks). Under the
  [NETWORK] section add the line "EXCLUDE=0" (without the quotation marks).

4. Restart your machine.


The products included here are manufactured by vendors independent of Microsoft;
we make no warranty, implied or otherwise, regarding these products' performance
or reliability.

Additional query words: 3.10 3.11 old previous 3rdparty

======================================================================
Keywords          :  
Technology        : kbAudDeveloper kbWFWSearch kbWFW310 kbWFW311
Version           : WINDOWS:3.1,3.11

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.