KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q89558: WFWG and Novell: LASTDRIVE=Z Makes [ and ] Active Drives

Article: Q89558
Product(s): Microsoft Windows 3.x Retail Product
Version(s): WINDOWS:3.1,3.11
Operating System(s): 
Keyword(s): 
Last Modified: 02-OCT-1999

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows for Workgroups versions 3.1, 3.11 
-------------------------------------------------------------------------------

SYMPTOMS
========

The following symbols appear as NetWare login drives when Novell NetWare
Connectivity is loaded in Windows for Workgroups and the line LASTDRIVE=Z is
included in the CONFIG.SYS file:

    "[" and "]"

CAUSE
=====

Setting LASTDRIVE=Z conflicts with Novell NetWare NETX.COM and NETX.EXE because
they use drive letters after those set by the LASTDRIVE= statement in the
CONFIG.SYS file.

WORKAROUND
==========

To correct this problem, change the line to LASTDRIVE=P, instead of Z.

MORE INFORMATION
================

The value of the LASTDRIVE statement is set to P by default when Novell NetWare
connectivity is loaded in Windows for Workgroups. The LASTDRIVE statement
specifies the range of drive letters you can use for connecting to other Windows
for Workgroups computers. For example, if your LASTDRIVE is set to P, you can
use letters from A to P to connect to other Windows for Workgroups computers.

If you set up Novell NetWare connectivity, the letter that follows the LASTDRIVE
value is your login drive. (This is because Novell uses LASTDRIVE +1.) For
example:

- If LASTDRIVE=P, then your login drive is Q. Although you can use any letter
  to connect to NetWare directories, letters after the value of the LASTDRIVE
  statement (that is drives after P) are reserved for NetWare directories only.

- If LASTDRIVE=F, then your login drive is G, and drives after F are
  unavailable for connecting to other Windows for Workgroups computers.

NOTE: If your login script(s) has been set up to use drive F as the login drive,
setting LASTDRIVE=P may result in errors during bootup. To resolve those errors,
change your login script(s) to reflect the login drive change, or change
LASTDRIVE to E. Please note the following limitations:

- If you set LASTDRIVE to E and your users have machines with single hard disk
  drives (C), you are limiting them to two network connections (D and E).

- If you set LASTDRIVE to E, and your users have local hard disk drives with
  only two partitions (C and D) and a CD-ROM drive (E), they cannot establish
  any network connections.

Novell NetWare is manufactured by Novell, Inc., a vendor independent of
Microsoft; we make no warranty implied or otherwise regarding these products'
performance or reliability.

Additional query words: 3.10 3.11 novell last drive login default 3rdparty

======================================================================
Keywords          :  
Technology        : kbAudDeveloper kbWFWSearch kbWFW310 kbWFW311
Version           : WINDOWS:3.1,3.11

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.