Q87972: ADMIN.WRI from WinLogin 1.0 Part A
Article: Q87972
Product(s): Microsoft Windows 95.x Retail Product
Version(s): WINDOWS:3.1,3.11; :1.0
Operating System(s):
Keyword(s):
Last Modified: 01-OCT-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows versions 3.1, 3.11
- Microsoft WinLogin, version 1.0
-------------------------------------------------------------------------------
SUMMARY
=======
The following information was taken from the WinLogin 1.0 ADMIN.WRI file. It is
part one of two parts. This article contains sections 1.0 through 3.7.
This information applies to version 1.0 of Microsoft WinLogin. For information
about ordering Microsoft WinLogin, call the Microsoft Sales Information Center
(MSIC) at (800) 426-9400, or mail the form supplied with the Windows Resource
Kit (WRK) for the Microsoft Windows operating system version 3.1.
MORE INFORMATION
================
WinLogin Administrator's Reference
----------------------------------
This document contains detailed technical information about
how WinLogin is designed. If you are looking for additional
information about WinLogin see "Other Online Documents" at
the end of this file for a description of the other WinLogin
online documents.
Contents
--------
This document contains additional information on the
following topics:
1.0 What Does WinLogin Do?
2.0 How Does WinLogin Work?
2.1 File Types
2.2 Merge Rules
2.3 Data Sources
2.4 Putting it all together...
2.5 Network Independence
3.0 Client Details
3.1 Disk Layout
3.2 Fallback Configurations
3.3 WLCOM.COM
3.4 WINLOGIN.EXE
3.5 WLMERGE.DLL
3.6 MSINIMRG.DLL
3.7 COPYMRG.DLL
4.0 Configuration Data Layout
4.1 Accessing Data Locations
5.0 Security Issues
6.0 Environment Variable Support
7.0 Customizing Client Setup
7.1 Machine Name
7.2 Fallback Files
7.3 Additional Files
8.0 Other Online Documents
1.0 What Does WinLogin Do?
The configuration of Windows 3.1 is controlled by a
(sometimes large) set of files, which are lumped into a
category called "configuration files". Within this category
are several different types of files, such as .INI files and
.PIF files. What Windows looks and acts like is controlled
directly by these files, thus, managing the configuration of
Windows means managing these files' contents.
The first step in managing a configuration file is being
able to edit the file's contents. Windows already provides
PIFEDIT.EXE, which must be used to edit the contents of the
binary .PIF files. For .INI files, WinLogin includes an
editor that offers a somewhat more structured and controlled
view into the file than that provided by simple text
editors.
The second step in managing a configuration file involves
making sure that the correct file is available to Windows as
it boots, and that the contents of each file correctly
represent the desired combination of administrative
settings, hardware requirements and user preferences.
Providing this functionality is the central aim of WinLogin.
At this time, WinLogin combines administrative settings with
hardware requirements and user preferences for Microsoft
Standard .INI File format .INI files only. Innovative
manipulation of .INI file values and the file copying which
WinLogin can do for all other types of configuration files
offers a great deal of power and flexibility.
2.0 How does WinLogin work?
Understanding WinLogin is aided greatly by understanding the
following concepts.
2.1 File Types
Everything that WinLogin does to and/or with a configuration
file is determined by the file type. WinLogin stores its
knowledge about file types in the file type table in the
database. Each entry in the table associates a file type
name with an editor name, the arguments that editor expects
to see when it is invoked and the name of the merge DLL that
the client should use when handling that file type.
When one of the administrative tools needs to edit a
configuration file, it looks up the name of the editor for
that file type and invokes it for use on the file. When the
WinLogin client is preparing the configuration files for
Windows to boot with, it looks up the proper merge DLL and
invokes it to process the file.
When either the administrative tools or the client search
the table for a particular file type the search is performed
most specific to least. For example, the default file type
table contains an entry for ".INI". If you were to add an
entry for "WINWORD.INI", then searching the table for
WINWORD.INI would match the new entry exactly, while
searching for any other file with the .INI extension would
still match the original .INI entry in the table. This
allows you to special case
how WinLogin handles certain specific files (like
WINWORD.INI) which cannot be treated like other files with
the same extension.
By default, WinLogin knows about three file types, .INI
files, .PIF files and .BAT files. You can change the values
for the default file type entries or add your own file type
entries using the File Type editor as described in the
printed documentation.
2.2 Merge Rules
When processing .INI files, WinLogin needs to know certain
things about each entry in the file. This knowledge is
stored in the form of Merge Rules. For each entry that is to
be processed, a Merge Rule must exist to describe:
- The Default Source for the entry value
- The Type of the entry
- The User Preference rule for the entry
The Default Source of an entry is the source of the default
value for the entry -- either the administrative value or
the value required by the workstation from which the user
logs on.
The Type of an entry is one of "Simple", "Multi-Valued" or
"Multi-Instanced". A Simple entry is one which has a single
value, for instance BorderWidth= or KeyboardSpeed= in
WIN.INI. A Multi-valued entry is one that has multiple
values for the same entry, for instance the load= or run=
lines in WIN.INI. A Multi-instance entry is one that appears
in the same section multiple times with a different value
each time, for instance the device= lines in SYSTEM.INI.
The User Preference rule for an entry indicates how
conflicts between the default value (either admin or
workstation specified) and any user preferences found in the
user data are to be resolved. If "Disallow" is chosen, the
user preference is overridden with the default. If "Merge
with Default" is selected, then the user preferences are
merged with the default values. (This is not an option for
"Simple" entries.) Finally, if the rule is "Replace
Default", the user preferences completely overrides the
default value(s).
While processing an .INI file, the WinLogin client uses
these merge rules to construct, one entry at a time, the
data that Windows needs, either to boot, or to display the
environment the user is expecting to see.
By default, WinLogin knows the merge rules for some of the
entries in the standard Windows 3.1 .INI files. New merge
rules may be added or the existing values changed (see your
Administrator's Reference for information on the Merge Rule
Editor).
2.3 Data Sources
WinLogin is designed around the requirement that there be
some amount of shared file system space between the
administrator and all of the workstations participating in
the system. This space can be shared by all workstations in
the system, or can be configured on a group or
domain basis across multiple servers in the installation. In
this shared file space WinLogin stores:
- The administrative default settings (global settings and/or on a
user group basis)
- The user preferences (each set of preferences in a separate sub-
directory)
- The workstation specific settings (if the administrator wants to
edit them remotely)
- The Merge Rules
- The File Type information
- The complete configuration files of types other than .INI
Optionally, WinLogin may also store in the shared file space:
- The location of the administrative default configuration files
(settings)
- A list of users known to the system and the location of each user's
configuration files
- A list of user groups known to the system and the location of each
group's configuration files
- A list of workstations known to the system and the location of each
workstation's configuration files
The Merge Rules, File Type information and all the optional
data are stored in a shared database.
The other data may be spread across multiple file servers,
and the number of different ways that it is likely to be
divided and organized is limited only by the number of ways
different administrators in different environments want to
manage their data. Given the nearly infinite number of
possibilities, WinLogin is faced with the challenge of
finding the sets of files that contain the administrator's
desires for both global and group settings, the current
workstation's requirements and the current user's preferences. The
remainder of this section outlines how WinLogin performs the
search for these four sets of data.
When the WinLogin client first begins to build a Windows
configuration, it knows three things:
- The location of the shared database
- The name of the current user
- The name of the current machine
In addition, the administrator may specify (at installation
time) full or partial paths, including references to
environment variables that are to be resolved by WinLogin,
to any of the four data sets (see section 6.0 on Environment
Variable Support). For the paths that are fully qualified in
this manner the search for the data set is complete. For the
source paths that are not given in this manner, WinLogin
turns to the database to locate the data set.
An example:
The WinLogin client is running on a workstation named
CALVIN. The current user is HOBBES, and the shared database
associated with this machine is stored on the server SUSIE.
Further, when the administrator installed the WinLogin
software on CALVIN, he specified that WinLogin
should always look for the workstation configuration data on
the local hard drive at C:\WKSTASRC, and that the search
path for the administrative data should be modified based
upon the environment variable %USERGRP%.
WinLogin finds the four data sets to use as input as
follows:
Workstation Data Set - since the administrator specified a
full path to this data set the search is over. It is always
the administrator's responsibility to ensure that the
correct data exists where ever WinLogin is told to look, and
that WinLogin is able to access that data.
Admin Data Set - since a full path to the admin data set was
not given, the administrator must have filled in the
location of the admin data set in the shared database on
SUSIE. WinLogin queries the database to retrieve this value
and uses it as the root of the path to look in. Since the
administrator also specified that the search for the admin
data be modified by the environment variable %USERGRP%,
WinLogin searches the environment for the value and appends
the result to the path that will be searched. It is up to
the administrator to set valid environment variables before
WinLogin is invoked.
User Data Set - since a full path to the user data set was
not given, the administrator must have created a record in
the shared database on SUSIE for the user HOBBES, specifying
at that time where HOBBES' configuration files are to be
kept. WinLogin queries the database for this location and
looks there for any user preference configuration data.
Group Data Set - when creating the record for user HOBBES,
the administrator may have assigned HOBBES to one user
group. Since a full path to the group data set was not
given, WinLogin checks to see if HOBBES is in a group (in
this case the answer is yes, HOBBES is in
the group TIGERS) and then queries the database for the
location of the group TIGERS' configuration files. Any
configuration data found in the group location is combined
with the data in the admin location with the group value
overriding the admin value. The result is treated as
administrative defaults.
2.4 Putting it all together...
When building a configuration, WinLogin first figures out
the set of files it needs to process. For each of those
files it retrieves the correct merge DLL that should be
invoked for the file and invokes it, passing the name of the
file and the paths to the source data locations it has
found. For .INI files, the Merge Rules dictate how the data
at all or some of the source locations gets combined into
the files that Windows will use when it boots. For other
file types, a file copy is performed from one of the data
source locations to the local machine.
2.5 Network Independence
One of the design goals of WinLogin is to provide a network
independent solution to the problems that are addressed. In
order to achieve this, much of the work performed by
WinLogin is done from a Windows application, allowing
WinLogin to take advantage of the generic network interfaces
offered by Windows and supported by many network vendors.
This allows WinLogin to work with most networks that support
Windows 3.1.
3.0 Client Details
The majority of the work performed by WinLogin is done in
the client components. This section details how the client
is laid out on disk and what each component does.
3.1 Disk Layout
The WinLogin client is made up of a DOS .COM program, a
Windows application and a number of Windows DLLs. Total
disk space required for the client software is approximately
400K bytes. All of the software is installed in the Windows
directory on the machine. In addition, a sub-directory
called "FALLBACK" is created under the Windows directory,
and one of two "fallback configurations" stored there.
Finally, WinLogin's own .INI file, WINLOGIN.INI, is stored
in the Windows directory.
3.2 Fallback Configurations
A fallback configuration is a set of configuration files
that is known to successfully boot Windows. WinLogin
maintains two fallback configurations. The first, the
"machine fallback" is stored the
"FALLBACK" sub-directory under the Windows directory on the
machine. This fallback configuration is made up of some of
the critical .INI files that were on the machine at the time
the WinLogin client software was installed, such as the
SYSTEM.INI and WIN.INI. The other, the "user fallback", is
the set of files for the last user for whom WinLogin
successfully built a configuration on the machine. These
files are stored in the Windows directory itself, with the
suffix .LGN replacing the usual .INI.
3.3 WLCOM.COM
When installed, WLCOM.COM is called WIN.COM and WIN.COM has
been renamed W31.COM. This is done so the user can type
"win" as expected to invoke Windows, but also get the
additional WinLogin functionality. WLCOM.COM retrieves the
fallback directory from WINLOGIN.INI, finds W31.COM, sets up
the initial boot configuration from the machine fallback
configuration and invokes Windows via W31.COM. WINLOGIN.EXE
(the Windows component described in the next section)
communicates status back to WLCOM.COM through WINLOGIN.INI.
If there were errors in the configuration merge or reboot
process, WLCOM.COM tries to recover using one of the
fallback configurations.
WLCOM.COM also adds one new switch to the command line
options of Windows. With WLCOM.COM installed as WIN.COM,
typing win /U:<username>, where the user name is the name of
the user logged on at the machine will cause Windows to boot
with the last user's successful configuration, if the last
user's name matches the user name given on the command line.
Otherwise the files in the fallback directory are used as
the initial boot configuration, which will likely result
in a configuration merge and reboot as described in the
section on WINLOGIN.EXE.
3.4 WINLOGIN.EXE
WINLOGIN.EXE is a Windows program that performs most of the
work associated with the client side of WinLogin. It runs in
one of two modes, either as the Windows shell, or as a
regular application.
As the Shell
------------
When WINLOGIN.EXE is run as the shell (only done during the
intermediate steps of booting a WinLogin machine) it follows
this decision table:
Step Condition Value Action
1 Is someone logged on NO Prompt if user wants
at this machine? to continue with
current
configuration or
return to DOS. If
continue, go to
step 3, else Exit
Windows.
YES Continue with merge.
2 Check to see if we NO Go to step 3.
need to load a
new configuration.
YES Continue with merge.
Load the configuration
(merge)for the current
user and machine (described
in the section on
WLMERGE.DLL).
3 Replace shell= with correct shell
(e.g. progman). Add WINLOGIN.EXE
to load=. Restart Windows with
configuration now in place.
As a Program
------------
When WINLOGIN.EXE is run as a program (primarily intended to
be done automatically from load= upon Windows restart) it
offers the user two options and a help menu. The first
choice is to save the current configuration. If the user
chooses this then the current user preferences are saved in
the user's configuration data files on the network. The
second choice is to exit the application. If WINLOGIN.EXE
has detected any .INI file changes the user is prompted to
save them, but not forced to do so. The application then
exits.
In addition, WINLOGIN.EXE "wakes up" every few seconds to
check for logon status changes and reacts according to this
decision table:
Condition Action
Someone was logged on Offer choice of continue with
and now no one is. current config (disables saving) or
Exit to DOS.
Someone was logged on Offer choice of continue with current
and now someone else is config (disables saving) or Restart
Restart Windows with a new
configuration built for the current
user.
No one was logged on Offer choice of continue with currect
and now someone is. config (disables saving) or Restart
Windows with a new configuration
built for the current user.
When the user attempts to Exit Windows, such as from Program
Manager's File.Exit menu, WINLOGIN.EXE prompts the user to
save their current configuration if they wish to do so. When
this is completed Windows exits.
If the user just shuts off the machine, no attempt is made
to save their configuration changes (if they made any) back
to the database.
3.5 WLMERGE.DLL
The real work of building a user's configuration is done in
WLMERGE.DLL, that is called across a private interface by
WINLOGIN.EXE. This DLL provides a set of data driven
functions that build up the set of configuration files
that is to be used in the restart of Windows. In addition,
the DLL also provides functions that save user preferences
back to the user's portion of the database and functions that
determine if loading or saving the configuration need be done
at all for a given user/machine/time combination.
In building a configuration, WLMERGE.DLL first merges the
file WLMERGE.INI. When built this file has the following
format:
[load]
file=file1
file=file2
.....
file=fileN
[destinations]
file1=<full path for file1's destination>
file2=<full path for file2's destination>
...
fileN=<full path for fileN's destination>
The [load] section is likely a combination of files that the
admin has assigned globally, to the group the user is a
member of or to the user specifically. Where those files
need to be for Windows to find them during the boot process
is generally machine dependent, and thus the [destinations]
section is likely to come from the current workstation's data
set. Thus the same set of files get built no matter which
machine the user logs in from, but they can end up in the
correct location on each different machine.
WLMERGE.DLL then iterates through each of the files in the
files section, invoking the proper merge DLL (based on data
in the File Type table in the database) on that file,
passing the desired destination for the result. If a file
is not found in the destinations section, then WLMERGE.DLL
uses the current Windows directory as the desired
destination.
Any configuration file merge, whether an .INI file merge or
a simple file copy, works off source data. The process
WinLogin uses to find the data sources is outlined in
section 2.3.
Saving a configuration basically reverses the process,
iterating through the list of files again, this time
invoking the Save function of each merge DLL, passing the
destination as the source for the save.
Two merge DLLs are included in the WinLogin system:
MSINIMRG.DLL and COPYMRG.DLL.
3.6 MSINIMRG.DLL
MSINIMRG.DLL implements the merge and diff (save) code for
Microsoft Windows Standard .INI files.
For the merge, it is important to note that MSINMRG.DLL
drives off the Merge Rules stored in the shared database. If
an entry is to be processed (and thus end up in the
constructed file) it must have a Merge Rule in the database.
For the diff (save), MSINIMRG.DLL drives off the sections
and keys found in the file itself, not the merge rules in
the database. The behavior of the system on "unknown" keys
(those for which the database contains no merge rule) is
controlled by a setting in WINLOGIN.INI. The administrator
may control if user installed applications that put entries
in the standard .INI files follow the user as user
preferences or if they are ignored when the user's
preferences are stored back to the database. If allowed,
the system can be configured to track application .INI files
other than the standard Windows .INI files by adding the
file to the [files] section of WLMERGE.INI.
The diff algorithm assumes that the default data set has not
changed since the merge, which allows us to compare the
value in the file with the default data, extracting the
different part as the user preference. This assumption is
checked on a file level, and if the default data set has
changed since the merge time of the file to be processed,
the file is not processed. This helps ensure data integrity
in the data set, but may cause the occasional changed user
preference to be lost. Whenever this case is encountered the
user is notified of the situation via a popup.
3.7 COPYMRG.DLL
COPYMRG.DLL implements a very simple merge and diff
algorithm that may be applied to virtually any kind of file.
Given a file name and the desired destination path:
if the file exists in the user directory
copy it from there to the destination path
else if the file exists in the group directory
copy it from there to the destination path
else if the file exists in the admin directory
copy it from there to the destination path
else if the file exists in the wksta (platform) directory
copy it from there to the destination path
"Diffing" the file:
if the file exists in the user directory
copy it from destination path to there
Additional query words: 3.10
======================================================================
Keywords :
Technology : kbWin3xSearch kbWinLoginSearch kbZNotKeyword3 kbWin310 kbWin311 kbWinLogin100
Version : WINDOWS:3.1,3.11; :1.0
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1986-2002.