Q85560: Creating a New SYSTEM.INI Without Third-Party Drivers

Article: Q85560
Product(s): Microsoft Windows 95.x Retail Product
Version(s): 3.1,3.11
Operating System(s): 
Keyword(s): 
Last Modified: 12-FEB-2002

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows versions 3.1, 3.11 
-------------------------------------------------------------------------------


SUMMARY
=======

You can use your original Windows disks to create a new SYSTEM.INI file for your
specific hardware. This can be useful for troubleshooting purposes or for
replacing a damaged or deleted SYSTEM.INI file.

NOTE: As a precaution, you may want to start the Setup program with the original
SYSTEM.INI file, and then press PRINT SCREEN so that you have a printed copy of
the your settings. You can then use this as a reference when you reset them.

MORE INFORMATION
================

To create a new SYSTEM.INI file that is configured for your specific hardware
but does not contain any references to third-party device drivers, do the
following:

1. Rename the SYSTEM.INI file to SYSTEM.BAK.

2. Expand the file SYSTEM.SR_ from the original Windows disks to the Windows
  directory with the following command:

  c:\windows\expand a:\system.sr_ c:\windows\system.ini

  NOTE: This file can be found on Disk 1 of the Windows 3.1 1.44-megabyte (MB)
  3.5-inch disk set or on Disk 2 of the 1.2-MB 5.25-inch disk set.

3. Change to the Windows drive, and then change to the Windows directory. For
  example:

  c:
  cd \windows

4. Type "setup" (without the quotation marks) to start the MS-DOS-based portion
  of Windows Setup.

5. Select the correct hardware options for your system. (They are blank by
  default.)

  NOTE: For a list of valid choices, move your cursor to the blank field and
  then press ENTER.


6. Accept the changes. (At this point, you can have Setup copy new drivers if
  you want.)

7. Open the new SYSTEM.INI file in a text editor (for example, MS-DOS 5.0
  Editor). Make the following changes to the SYSTEM.INI file:

  a. Add PROGMAN.EXE to the SHELL= line in the [Boot] section.

  b. Remove or remark out the Taskman.exe= line in the [Boot] section.

  c. To enable 32-bit disk access, add the following lines to the [386Enh]
     section:

           32BitDiskAccess=<Boolean>
           device=*int13
           device=*wdctrl

     Replace <Boolean> with On if you want 32-bit disk access enabled;
     replace it with Off if you do not want 32-bit disk access enabled.

  For more information about 32-bit disk access, see Appendix D in the Windows
  Resource Kit manual, or query on the following words in the Microsoft
  Knowledge Base:

  windows and 3.1 and 32-bit and disk and access

8. Start Windows. If you do not receive any errors, you have successfully
  re-created your SYSTEM.INI file.

  If you receive error S020 or S021, the SYSTEM.INI file you created may be
  corrupted. To correct this problem, do the following:

  a. Check for a duplicate SYSTEM.INI file by typing "dir c:\ system.ini /s"
     (without the quotation marks) at the MS-DOS command prompt.

  b. Run CHKDSK to check for lost allocation units by typing "chkdsk /f"
     (without the quotation marks) at the MS-DOS command prompt.

  c. Make sure your hard disk has sufficient free space.

  d. Delete the corrupted SYSTEM.INI file and then follow the steps outlined
     above again, starting with number 2.

  e. If all else fails, reinstall Windows.

Additional query words: 3.10 3.11 recreate re-create system.src tshoot rebuild clean expanding system.bkp troubleshoot hardware system.tmp vanilla "how to create a new" third-party

======================================================================
Keywords          :  
Technology        : kbWin3xSearch kbZNotKeyword3 kbWin310 kbWin311
Version           : :3.1,3.11

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1986-2002.