KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q80269: PC Gen: Contents of Modem Script File VSERIES.MDM

Article: Q80269
Product(s): Microsoft Mail For PC Networks
Version(s): WINDOWS:2.1e
Operating System(s): 
Keyword(s): 
Last Modified: 11-NOV-1999

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Mail for PC Networks, version 2.1e 
-------------------------------------------------------------------------------

SUMMARY
=======

The following is the contents of the Microsoft Mail version 2.1e modem script
file VSERIES.MDM, which can be compiled with SCRCOMP.EXE:

  ;*********************************************************************
  ;
  ;                    Microsoft Mail Script File
  ;
  ;       Filename: vseries.mdm
  ;       Date    : March 21, 1990
  ;       Script  : Standard script file for Hayes V-series modems
  ;
  ;     This script file contains the standard modem setup strings used
  ;  by the External, Transmit and Listen programs. There are five
  ;  procedures defined in this script file for setting up the modem and
  ;  for connecting to a remote External machine.
  ;
  ;     This script file is automatically invoked by using the -TV
  ;  command line option.
  ;
  ;     The modem setup strings used here will be adequate for most
  ;  people but there may be some changes required if you are dialing
  ;  overseas and require a longer wait for Carrier Detect (S7 register)
  ;  or if you wish to change the speaker volume. Note that if you used
  ;  the -Innn option in version 1.0 or 2.0 that you will have to modify
  ;  the S7 register and recompile this script file.
  ;
  ;     Consult your modem manual for more information on setup options.
  ;
  ;  Script procedures defined:
  ;       INITIALIZE
  ;       RESET
  ;       CALL
  ;       ANSWER
  ;       DISCONNECT
  ;
  ;  Return codes for External, Transmit, Listen:
  ;       0  - OK
  ;       1  - CONNECT 300
  ;       2  - not defined
  ;       3  - NO CARRIER
  ;       4  - ERROR
  ;       5  - CONNECT 1200
  ;       6  - not defined
  ;       7  - BUSY
  ;       8  - NO ANSWER
  ;       9  - not defined
  ;      10  - CONNECT 2400
  ;      11  - not defined
  ;      12  - CONNECT 9600 (high speed connection)
  ;
  ;
  ;*********************************************************************

  INITIALIZE:
          title "Hayes V-series 9600 Script"

          baud 9600              ; set the baud rate
          display "   Baud Rate : 9600"
          $attempts = 5

  init_retry:
          sendln "ATZ"           ; reset modem to default settings
          wait 2
          waitrsp 1

          if ("0" isin response)
              goto reset_okay

          if ("OK" isin response)
              {
  reset_okay:
              sendln "AT&F&C1&D2E0L0M1V0X3"
              wait 2
              waitrsp 3

              if ("0^M" isin response)
                  {
                  sendln "ATS0=0S7=45S9=6S10=50S12=50&W"
                  waitrsp 3
                  if (response = "0^M")
                      return 0
                  }
               }
          dec $attempts
          if ($attempts > 0)
                  goto init_retry

          return 4

  RESET:
          baud 9600              ; set the baud rate
          display "   Baud Rate : 9600"

          sendln "ATZ"           ; reset modem to default settings
          waitrsp 1

          if (response = "0^M")
               return 0
          else
               return 4

  CALL:
          $ret = 8               ; set default ret code to "no answer"

          clearrsp               ; clear the response buffer

          echo 0                 ; do not display phone number

          sendln "ATD" + dial_mode + phone_number  ; execute the dial up

          echo 1                 ; turn echo back on

          waitrsp 120            ; wait until the modem responds (max
                                 ;    2 minutes)

          if (response = "1^M")
            {
            baud 300
            display ">>> CONNECT 300 <<<"
            $ret = 1
            }
          else if (response = "3^M")
            {
            display ">>> NO CARRIER <<<"
            $ret = 8             ; no answer or no connect
            }
          else if (response = "5^M")
            {
            baud 1200
            display ">>> CONNECT 1200 <<<"
            $ret = 5
            }
          else if (response = "7^M")
            {
            display ">>> BUSY <<<"
            $ret = 7             ; busy
            }
          else if (response = "10^M")
            {
            baud 2400
            display ">>> CONNECT 2400 <<<"
            $ret = 10
            }
          else if (response = "11^M")
            {
            baud 4800
            display ">>> CONNECT 4800 <<<"
            $ret = 11
            }
          else if (response = "12^M")
            {
            baud 9600
            display ">>> CONNECT 9600 <<<"
            $ret = 12
            }
          else if (response = "14^M")
            {
            baud 19200
            display ">>> CONNECT 19200 <<<"
            $ret = 12
            }

          return $ret            ; return connect baud rate to
                                 ;    application

  ANSWER:
          $ret = 8               ; set default ret code to "no answer"

          waitrsp 1              ; see if phone is ringing

          if (response = "2^M")  ; 2 is numeric form of "RING"
              {
              if (listen = 1)    ; see if Listen program is running or
                  sendln "ATD"   ; not answer phone in originate mode
                                 ; (Listen)
              else
                  sendln "ATA"   ; answer the phone normally

              waitrsp 120        ; wait for return code from modem (max
                                 ;    2 minutes)

              if (response = "1^M")
                {
                baud 300
                display ">>> CONNECT 300 <<<"
                $ret = 1
                }
              else if (response = "3^M")
                {
                display ">>> NO CARRIER <<<"
                $ret = 8             ; no answer or no connect
                }
              else if (response = "5^M")
                {
                baud 1200
                display ">>> CONNECT 1200 <<<"
                $ret = 5
                }
              else if (response = "10^M")
                {
                baud 2400
                display ">>> CONNECT 2400 <<<"
                $ret = 10
                }
              else if (response = "11^M")
                {
                baud 4800
                display ">>> CONNECT 4800 <<<"
                $ret = 11
                }
              else if (response = "12^M")
                {
                baud 9600
                display ">>> CONNECT 9600 <<<"
                $ret = 12
                }
              else if (response = "14^M")
                {
                baud 19200
                display ">>> CONNECT 19200 <<<"
                $ret = 12
                }
              }

          return $ret            ; return connect baud rate to
                                 ;    application

  DISCONNECT:
          wait 2                 ; wait 2 seconds

          send "+++"             ; send escape sequence to put modem
                                 ;    back to command state
          wait 2                 ; wait 2 seconds

          clearrsp               ; clear the response buffer

          sendln "ATH0"          ; hang up the phone

          waitrsp 3              ; wait for a response

          if (response != "0^M") ; if hang up failed, drop DTR to force
                                 ;    hang up
              {
              DTR 0              ; drop DTR to reset modem
              wait 2             ; some modems require a delay here
              DTR 1              ; raise DTR
              clearrsp           ; clear response buffer
              }

          return 0               ; always return OK

Additional query words: 2.10 2.1 2.10e

======================================================================
Keywords          :  
Technology        : kbMailSearch kbZNotKeyword3 kbMailPCN210e
Version           : WINDOWS:2.1e

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1986-2002.