Q80263: PC Gen: Contents of Modem Script File TELEBIT.MDM
Article: Q80263
Product(s): Microsoft Mail For PC Networks
Version(s): WINDOWS:2.1e
Operating System(s):
Keyword(s):
Last Modified: 14-DEC-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Mail for PC Networks, version 2.1e
-------------------------------------------------------------------------------
SUMMARY
=======
The following is the contents of the Microsoft Mail version 2.1e modem script
file TELEBIT.MDM, which can be compiled with SCRCOMP.EXE:
;*********************************************************************
;
; Microsoft Mail Script File
;
; Filename: telebit.mdm
; Date : Oct 26, 1990
; Script : Standard script file for Telebit TrailBlazer modems
; History : Oct 26, 1990 - added support for T2500 model
;
; This script file contains the standard modem setup strings used
; by the External, Transmit and Listen programs. There are five
; procedures defined in this script file for setting up the modem and
; for connecting to a remote External machine.
;
; This script file is automatically invoked by using the -T
; command line option.
;
; The modem setup strings used here will be adequate for most
; people but there may be some changes required if you are dialing
; overseas and require a longer wait for Carrier Detect (S7 register)
; or if you wish to change the speaker volume. Note that if you used
; the -Innn option in version 1.0 or 2.0 that you will have to modify
; the S7 register and recompile this script file.
;
; Consult your modem manual for more information on setup options.
;
; Script procedures defined:
; INITIALIZE
; RESET
; CALL
; ANSWER
; DISCONNECT
;
; Return codes for External, Transmit, Listen:
; 0 - OK
; 1 - CONNECT 300
; 2 - not defined
; 3 - NO CARRIER
; 4 - ERROR
; 5 - CONNECT 1200
; 6 - not defined
; 7 - BUSY
; 8 - NO ANSWER
; 9 - not defined
; 10 - CONNECT 2400
; 11 - not defined
; 12 - CONNECT 9600 (high speed connection)
;
;
;*********************************************************************
INITIALIZE:
title "Telebit TrailBlazer Script"
baud 9600 ; set the baud rate
display " Baud Rate : 9600"
$attempts = 5
init_retry:
sendln "ATZ" ; reset modem to default settings
wait 2
waitrsp 1
if ("0" isin response)
goto reset_okay
if ("OK" isin response)
{
reset_okay:
sendln "AT&FE0M1V0"
wait 1
waitrsp 1
if ("0^M" isin response)
{
sendln "ATS0=0S7=45S9=6S10=50S12=50"
sendln "ATS52=1S53=1S58=2S61=20S66=1&W"
waitrsp 1
if (response = "0^M")
return 0
}
}
dec $attempts
if ($attempts > 0)
goto init_retry
return 4
RESET:
baud 9600 ; set the baud rate
display " Baud Rate : 9600"
sendln "ATZ" ; reset modem to default settings
waitrsp 1
if (response = "0^M")
return 0
else
return 4
CALL:
$ret = 8 ; set default ret code to "no answer"
clearrsp ; clear the response buffer
echo 0 ; do not display phone number
sendln "ATD" + dial_mode + phone_number ; execute the dial up
echo 1 ; turn echo back on
ring_loop:
waitrsp 120 ; wait until the modem responds
if (response = "1^M")
{
display ">>> CONNECT 300 <<<"
$ret = 1
}
else if (response = "3^M")
{
display ">>> NO CARRIER <<<"
$ret = 8 ; no answer or no connect
}
else if (response = "5^M")
{
display ">>> CONNECT 1200 <<<"
$ret = 5
}
else if (response = "7^M")
{
display ">>> BUSY <<<"
$ret = 7 ; busy
}
else if (response = "10^M")
{
display ">>> CONNECT 2400 <<<"
$ret = 10
}
else if (response = "12^M")
{
display ">>> CONNECT 9600 <<<"
$ret = 12
}
else if (response = "50^M")
{
display ">>> CONNECT FAST <<<"
$ret = 12
}
else if (response = "52^M")
{
$ret = 52
}
if ($ret = 52) ; check for remote ring code, and
; ignore
goto ring_loop
return $ret ; return connect baud rate to
; application
ANSWER:
$ret = 8 ; set default ret code to "no answer"
waitrsp 1 ; see if phone is ringing
if (response = "2^M") ; 2 is numeric form of "RING"
{
if (listen = 1) ; see if Listen program is running or
sendln "ATD" ; not answer phone in originate mode
; (Listen)
else
sendln "ATA" ; answer the phone normally
waitrsp 120 ; wait until the modem responds
if (response = "1^M")
{
display ">>> CONNECT 300 <<<"
$ret = 1
}
else if (response = "3^M")
{
display ">>> NO CARRIER <<<"
$ret = 8 ; no answer or no connect
}
else if (response = "5^M")
{
display ">>> CONNECT 1200 <<<"
$ret = 5
}
else if (response = "10^M")
{
display ">>> CONNECT 2400 <<<"
$ret = 10
}
else if (response = "12^M")
{
display ">>> CONNECT 9600 <<<"
$ret = 12
}
else if (response = "50^M")
{
display ">>> CONNECT FAST <<<"
$ret = 12
}
}
return $ret ; return connect baud rate to
; application
DISCONNECT:
wait 2 ; wait 2 seconds
send "+++" ; send escape sequence to put modem
; back to command state
wait 2 ; wait 2 seconds
clearrsp ; clear the response buffer
sendln "ATH0" ; hang up the phone
waitrsp 1 ; wait for a response
clearrsp ; clear response buffer
return 0 ; always return OK
Additional query words: 2.10 2.1 2.10e
======================================================================
Keywords :
Technology : kbMailSearch kbZNotKeyword3 kbMailPCN210e
Version : WINDOWS:2.1e
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1986-2002.