KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q76218: SWAPFILE.EXE May Not Recognize Logical Drives in Windows

Article: Q76218
Product(s): Microsoft Windows 95.x Retail Product
Version(s): WINDOWS:3.0,3.0a,3.1,3.11
Operating System(s): 
Keyword(s): 
Last Modified: 21-SEP-1999

3.00 3.00a 3.10 3.11

WINDOWS

kbref kbtool

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11 
-------------------------------------------------------------------------------

SUMMARY
=======

The Swapfile program included with Microsoft Windows may not recognize disk
drives with drive letters greater than C if disk partitioning methods other than
FDISK have been used, such as Disk Manager (DMDRVR.BIN), SpeedStor (SSTOR.SYS),
EDRVR.SYS, and so on. The Swapfile menu's Next Drive command is unavailable
(dimmed) if no drive other than drive C is recognized by Swapfile.

The Swapfile program allows you to create a swap file on a particular partition
if that partition contain 512 byte sectors. A nonstandard hard drive may have a
drive C that is standard (512 byte sectors), but all drives after C (D and
greater) are nonstandard (sector size other than 512).

It is possible for a temporary swap file to exist on logical drives such as drive
D or E if Windows is installed on one of those drives.

MORE INFORMATION
================

The Swapfile program's 512 bytes per sector requirement is inherited from the
BIOS of the personal computer. Third-party partitioning utilities (such as
Ontrack's Disk Manager and Storage Dimensions' SpeedStor) circumvent this
limitation by translating all communication between the disk and the BIOS. To
ensure compatibility with the industry standard of 512 bytes per sector,
SWAPFILE.EXE was written to not support any type of disk translation.

NOTE: If you use OEM versions of the FDISK command earlier than version 4.01,
which allow partitions greater than 32 MB, you encounter this problem. These OEM
versions of MS-DOS include Wyse DOS 3.21, NEC DOS 3.31, and Zenith DOS 3.3
Plus.

If the drive has been partitioned using a third-party partitioning method, do not
use the Swapfile program. Corruption of the file allocation table (FAT) can
occur, resulting in data loss. Using FDISK is the recommended partitioning
method when you plan to use Windows utilities.

REFERENCES
==========

"Microsoft Windows User's Guide," pages 520-531

Additional query words: 3.00 third party 3rd-party 3rd grey grayed non-standard swapfile swap file

======================================================================
Keywords          :  
Technology        : kbWin3xSearch kbZNotKeyword3 kbWin300 kbWin300a kbWin310 kbWin311
Version           : WINDOWS:3.0,3.0a,3.1,3.11

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.