KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q75689: Using Bernoulli Driver Version 7.0 or Later with MS-DOS

Article: Q75689
Product(s): Microsoft Disk Operating System
Version(s): MS-DOS:5.x,6.0,6.2,6.21,6.22
Operating System(s): 
Keyword(s): 
Last Modified: 17-DEC-2000

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft MS-DOS operating system versions 5.0, 5.0a, 6.0, 6.2, 6.21, 6.22 
-------------------------------------------------------------------------------

SUMMARY
=======

For compatibility with MS-DOS version 5.0 or later, you need version 4.7 or
later of the Bernoulli driver. If your Bernoulli driver is earlier than 4.7, it
may lock the machine during startup.

MS-DOS 5.0 or later cannot load the Bernoulli driver high unless version 7.0 or
later is used.

MORE INFORMATION
================

Version 7.0 of the Bernoulli driver is the latest driver available from IOMEGA.
This driver requires a model PC2, PC2B, or PC4B Bernoulli adapter card. If you
have an earlier model of the adapter card, you can upgrade by contacting
IOMEGA.

If you have the correct adapter card and boot your machine from the Bernoulli
drive, you will need to obtain a kit from IOMEGA that includes version 7.0 of
the driver, a manual, and an EPROM chip. If you have the correct adapter card
but do not boot from the Bernoulli drive, you will only need to obtain version
7.0 of the driver and the manual from IOMEGA. The new 7.0 driver is available
from IOMEGA customer support or by calling their bulletin board and downloading
700.ZIP and 700.EXE.

Version 5.2 of the Bernoulli driver for the PC3B adapter is available from IOMEGA
customer support. Version 5.2 is compatible with MS-DOS 5.0 and later as long as
it is not loaded high.

For more information on any of the above products, call IOMEGA at one of the
numbers below.

The product included here is manufactured by vendors independent of Microsoft; we
make no warranty, implied or otherwise, regarding this product's performance or
reliability.

Additional query words: 6.22 5.00 5.00a 6.00 6.20 7.00 RCD.SYS 3rdparty

======================================================================
Keywords          :  
Technology        : kbMSDOSSearch kbMSDOS621 kbMSDOS622 kbMSDOS620 kbMSDOS600 kbMSDOS500 kbMSDOS500a
Version           : MS-DOS:5.x,6.0,6.2,6.21,6.22

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1986-2002.