Q69829: Running Windows in Enhanced Mode with Tandy 4000 with SCSI
Article: Q69829
Product(s): Microsoft Windows 95.x Retail Product
Version(s): WINDOWS:3.0,3.0a
Operating System(s):
Keyword(s):
Last Modified: 13-DEC-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows versions 3.0, 3.0a
-------------------------------------------------------------------------------
SUMMARY
=======
Tandy Corporation recommends the following settings to run Microsoft Windows 3.0
in 386 enhanced mode on a Tandy 4000 computer with a SCSI hard drive:
- The /b- switch should be used when loading SMARTDrive in the CONFIG.SYS file.
Most of the SCSI hard drives with Tandy 4000 computers have Adaptec
controllers. The /b- switch turns off double buffering.
NOTE: The /b- switch would come after the Normal and Minimum Cache size
settings. An example of this is:
Device=C:\Windows\Smartdrv.Sys 2048 1024 /B-
- The line for HIMEM.SYS must be the first device line in the CONFIG.SYS file:
Device=C:\Himem.Sys
- The following line must be added to the [386Enh] section of the SYSTEM.INI:
VirtualhdIrq=False
MORE INFORMATION
================
If the ROM BIOS for the SCSI hard drive is version 2.0, 2.0c or earlier, then
the device driver SCSIHA.SYS must be loaded through the CONFIG.SYS file. This is
needed for proper operation in enhanced mode. If the ROM BIOS is version 4.05s,
5.05s, or later, then no additional device driver needs to be loaded.
For further information on SCSI-type drive and controllers, query on:
Windows and Adaptec and SCSI
The Tandy products included here are manufactured by a vendor independent of
Microsoft; we make no warranty, implied or otherwise, regarding this product's
performance or reliability.
Additional query words: 3.00 3.0 3.0a 3.00a KBHW 3rdparty
======================================================================
Keywords :
Technology : kbWin3xSearch kbZNotKeyword3 kbWin300 kbWin300a
Version : WINDOWS:3.0,3.0a
=============================================================================
THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.
Copyright Microsoft Corporation 1986-2002.