KnowledgeBase Archive

An Archive of Early Microsoft KnowledgeBase Articles

View on GitHub

Q102300: X400: Retaining Addresses When Reinstalling Gateway

Article: Q102300
Product(s): Microsoft Mail For PC Networks
Version(s): MS-DOS:2.1,3.0,3.2
Operating System(s): 
Keyword(s): 
Last Modified: 15-NOV-1999

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Mail Gateway to X.400, versions 2.1, 3.0, 3.2 
-------------------------------------------------------------------------------

SUMMARY
=======

When you reinstall the Microsoft Mail Gateway to X.400 access component on a
version 2.1, 3.0, or 3.2 Microsoft Mail for PC Networks postoffice, it is a good
idea to retain the current X.400 gateway recipient list.

The advantages of doing this are:

1. The administrator will not need to re-enter the X.400 list using the Admin
  Import command.

2. Those users with X.400 recipients in their Personal Address Lists (PALs)
  should not lose these addresses.

  NOTE: Versions 3.0 and 3.2 of Microsoft Mail for Windows use a Personal
  Address Book (PAB) and would not be affected by the procedure described
  below. The MS-DOS and Macintosh workstations will be affected.

To Retain the X.400 Address List
--------------------------------

1. Go to the Mail database and make backup copies of X400.NME and X400.GLB from
  the NME and GLB subdirectories, respectively.

2. Remove the access component using the following command

  x:\install -r,

  where x is the drive letter of the Microsoft Mail Gateway Access for X.400
  disk.

3. Reinstall the access component using the following command:

  x:\install

4. Copy the X400.NME and X400.GLB backup files into the NME\X400.NME and
  GLB\X400.GLB directories, respectively, replacing the new 4-byte X400.GLB and
  0-byte X400.NME files created by the installation process.

You can only restore the X400.NME and X400.GLB files to the postoffice at which
they were originally created.

To retain the list of X.400 users defined on a postoffice or to copy users from
one postoffice to another, use the IMPORT.EXE utility included with Microsoft
Mail for PC Networks.


Additional query words: 2.10 3.00 3.20 pal po

======================================================================
Keywords          :  
Technology        : kbMailSearch kbMailGateSearch kbZNotKeyword3 kbMailGatex400300 kbMailGatex400320 kbMailGatex400210
Version           : MS-DOS:2.1,3.0,3.2

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1986-2002.